KitchenAid KBPU182VSS Use & Care Guide - Page 15
Gas Conversions
UPC - 883049184746
View all KitchenAid KBPU182VSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2. Remove packing from around burner. 3. Remove plastic bags from grate and film from cover. 4. Reinstall grate. 5. Dispose of/recycle all packaging materials. 6. Go to the "Check and Adjust the Burners" section. GAS CONVERSIONS Tools and Parts for Gas Conversion Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. This kit is designed for use from sea level up to 2000 ft elevation. For higher elevations contact KitchenAid at 1-800-422-1230 in the U.S.A. or call 1-800-607-6777 in Canada. WARNING Tools needed ■ Phillips screwdriver ■ Pipe wrench ■ Adjustable wrench ■ 7 mm socket and wrench or 7 mm nut driver ■ Thin flat-blade screwdriver ■ Pliers ■ Pipe thread sealant certified for LP gas Parts supplied ■ Brass connector ■ Convertible regulator 4" (10.2 cm) W.C. Natural, 11" (28 cm) W.C. LP ■ Natural gas orifices IMPORTANT: Gas conversions must be done by a qualified installer. Before proceeding with conversion, shut off the gas supply to the appliance prior to disconnecting the electrical power. Explosion Hazard Use a new CSA International approved "outdoor" gas supply line. Securely tighten all gas connections. If connected to LP, have a qualified person make sure gas pressure does not exceed 11" (28 cm) water column. Examples of a qualified person include: licensed heating personnel, authorized gas company personnel, and authorized service personnel. Failure to do so can result in death, explosion, or fire. Conversion to a Local LP Gas Supply Installation of the regulator 1. Turn off the main gas supply valve. 2. Unplug Power™ burner or disconnect power. 3. Disconnect 20 lb LP gas fuel tank (if present). 4. Turn off all burner control valves. 15