KitchenAid KBPU182VSS Use & Care Guide - Page 20
Lighting Your Power™ Burner
UPC - 883049184746
View all KitchenAid KBPU182VSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Lighting Your Power™ Burner WARNING Manually lighting the Power™ burner 1. Remove the outdoor Power™ burner cover. 2. Remove the manual lighting extension (see following illustration) and attach a match to the split ring. Burn Hazard Do not let the burner flame extend beyond the edge of the pan. Doing so can result in burns. WARNING Food Poisoning Hazard Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness. 3. Strike the match to light it. 4. Guide the match to the burner you wish to light. 1. Remove the Power™ burner cover. Do not light burners with the cover on. 2. Do not lean over the Power™ burner. 3. Push in and turn the control knob for the inner or outer burner to LITE/HI and hold in. 5. Do not lean over the Power™ burner. Push in and turn the burner knob to LITE/HI for the burner you wish to light. The burner will light immediately. When burner is lit, turn knob to desired setting. 4. You will see the igniter glow. When burner is lit, release the knob. Turn knob to desired setting. 5. Repeat for the other burner as needed. IMPORTANT: If burner does not light immediately, turn the burner knob to OFF and wait 5 minutes before relighting. 6. Repeat for each of the other burners as needed. 7. Remove match and replace manual lighting extension inside its holder. IMPORTANT: If burner does not light immediately, turn the burner knob to OFF and wait 5 minutes before relighting. If any burners do not light after attempting to manually light them, contact the KitchenAid Customer eXperience Center. See the "Assistance or Service" section. 20