KitchenAid KBSD702MPS Owners Manual - Page 21
Connect to Refrigerator, Parts Supplied, Overmould Coupling on some models
View all KitchenAid KBSD702MPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connect to Refrigerator Parts Supplied � 1/4" to 1/4" (6.35 mm to 6.35 mm) male-to-male coupling 5. Connect the 7 ft (2.13 m) flexible codes-approved water supply line to the refrigerator. NOTE: If the main water shutoff valve is behind the refrigerator, a secondary water shutoff valve may be installed in line with the water supply line at the front of the product. Overmould Coupling (on some models) NOTE: The flexible, codes-approved water supply line should connect to the supply valve through the floor. 1. Unplug the refrigerator or disconnect power. 2. Connect the 7 ft (2.13 m) flexible codes-approved water tube to the water supply valve. 3. Flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear. 4. Tape the 7 ft (2.13 m) flexible codes-approved water supply line to the floor, 7" (17.78 cm) from the left side of the refrigerator. Tape along the length of the tubing, which will allow it to pass beneath the refrigerator without interference. NOTE: Allow a minimum of 26" (66.04 cm) of flexible codes-approved water supply line to be loose at the front of the refrigerator for connecting to the refrigerator. A. Household water line B. Nut (purchased) C. Ferrule (purchased) Discrete Coupling (on some models) A. Household water line B. Nut (purchased) C. Ferrule (purchased) D. Coupling E. Bulb F. Nut G. Refrigerator water tubing 6. Turn on the water supply valve and check all connections for leaks. 21