KitchenAid KCM534OB Use & Care Guide - Page 12
Using The Automatic Brew Timer, The Cleaning Needed Indicator, H And M, Buttons - how do i clean
UPC - 883049028071
View all KitchenAid KCM534OB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Operating Your Coffee Maker ENGLISH USING THE AUTOMATIC BREW TIMER The Coffee Maker can be programmed to brew coffee at a preset time, making it easy to wake up to fresh coffee every morning. To program and activate the automatic brew timer: 1. Press the Set (Program) Button. The brew timer display and Set (Program) indicator will begin to flash. The brew timer display will show the last brew time set. 2. Press the "H" (hour) and "M" (minute) Buttons below the brew timer display to set the hour and minutes. If a "H" or "M" Button is pressed and held, the digits will scroll rapidly. The AM and PM indicator lights on the brew timer display will change when the hour digits roll past "12". Make sure the desired brew time is correct with respect to AM or PM. "H" and "M" Buttons 3. After setting the brew time, press the Set (Program) Button to exit the program-setting mode. The Coffee Maker will automatically record the displayed brew time and exit the program-setting mode if no buttons are pressed for 10 seconds. 4. Fill the Coffee Maker with coffee and fresh water, then activate the automatic brew timer by pressing the Auto On Button. The programmed brew time will appear briefly on the brew timer display before it returns to the time-of-day, and the Auto On indicator will illuminate. 5. The Coffee Maker will begin brewing at the programmed time. 6. Each time you want the Coffee Maker to brew at the programmed time, activate the automatic brew timer by pressing the Auto On Button. The Coffee Maker will always default to the last brew time set. NOTE: To cancel automatic brewing, deactivate the brew timer by pressing the Auto On Button. When deactivated, the Auto On indicator light will go out. If program time has not been set prior to pressing Auto On button, the coffee maker will enter program set mode (see "Using the Automatic Brew Timer" on page 10). THE CLEANING NEEDED INDICATOR Calcium deposits ("scale") from water will build up in the Coffee Maker heat pump over time and impair brewing efficiency and coffee quality. When the Coffee Maker detects a build-up of scale, the cleaning needed indicator will light after a brewing cycle is complete. Once this occurs, descaling should be done as soon as possible to preserve the performance and life of your Coffee Maker. Please see page 12 for descaling steps. 10