KitchenAid KCM534OB Use & Care Guide - Page 15
Troubleshooting - error 4
UPC - 883049028071
View all KitchenAid KCM534OB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH Troubleshooting • If the brew timer display is not illuminated: Check to see if the Coffee Maker is plugged into a grounded 3 prong outlet. If it is, check the fuse or circuit breaker on the electrical circuit the Coffee Maker is connected to and make sure the circuit is closed. • If only a portion of the water added to the Coffee Maker actually brews: The Coffee Maker requires immediate descaling. Please refer to the descaling instructions on the previous page. • If "Err4" appears on the brew timer display: - A button may be jammed. Unplug the Coffee Maker and press each button several times. • If "Err1", "Err2", or "Err3" appear on the brew timer display: Press the On/Off Button to reset the Coffee Maker. (If the Coffee Maker has been stored or used in a cool environment, warm the Coffee Maker to normal room temperature before doing this.) If the error codes reappear, there is a problem with the Coffee Maker electronics. If the problem cannot be fixed with the steps above, please refer to the Warranty and Service section beginning on the following page. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. - Plug the Coffee Maker into a grounded 3 prong outlet. - If "Err4" appears again on the display, repeat this procedure. 13