KitchenAid KEBS278SSS Technical Guide - Page 21
Complete Installation
UPC - 883049034867
View all KitchenAid KEBS278SSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4. Securely fasten oven to cabinet using the #8-14 x 1˝ screws (2 for single oven, 4 for double oven) provided. Insert the screws through holes in mounting rails. Do not overtighten screws. A B A. Mounting rail B. Insert #8-14 x 1" screw. 5. On some models, the oven vent is taped to the side of the oven. With one #8-14 x 3/8˝ screw for each side of the vent, fasten vent securely to the oven. A B A. #8-14 x 3/8˝ screw B. Oven vent 6. Replace oven racks. 7. Replace oven door by inserting ends of hinges into hinge slots in the oven frame. 8. Push hinges in as far as they will go and open the oven door. You should feel the oven door drop into place. 9. Rotate both hinge latches back to the locked position. 10. Check that the door is free to open and close. If it is not, repeat the removal and installation procedures. See "Remove Oven Door," page 2-4. 11. Reconnect power. 12. Display panel will light briefly, and "PF" should appear in the display. 13. If display panel does not light, please reference the "Assistance or Service" section of the Use and Care Guide or contact the dealer from whom you purchased your oven. COMPLETE INSTALLATION 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Check that you have all of your tools. 3. Dispose of/recycle all packaging materials. 4. For oven use and cleaning, read the Use and Care Guide. Check Operation of Lower Oven 1. Turn power on. 2. When "CLOCK ENTER TIME" appears in the lower oven display touch START. 3. Touch LOWER OVEN to select the oven you are testing. 4. Touch BROIL. 5. Touch START. If oven does not operate, check the following: • Household fuse is intact and tight; or circuit breaker has not tripped. • Electrical supply is connected. • See "Troubleshooting" section in the Use and Care Guide. 6. When oven has been on for 5 minutes, feel for heat. If you do not feel heat or if an error code ("F" followed by a number plus "E" followed by a number) appears in the display, turn off the oven and contact a qualified technician. 7. Touch LOWER OVEN OFF. 2-7