KitchenAid KEBS278SSS Technical Guide - Page 59
Removing Lower Blower Assembly, Blower, Speed Resistor, And Oven Thermal Cutoff
UPC - 883049034867
View all KitchenAid KEBS278SSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
REMOVING LOWER BLOWER ASSEMBLY, BLOWER SPEED RESISTOR, AND OVEN THERMAL CUTOFF WARNING 4. Remove the twelve screws from the upper rear cover of the oven and remove the cover. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Unplug oven or disconnect power. Upper Rear Cover (12 Screws) WARNING Excessive Weight Hazard Use two or more people to move and install oven. Failure to do so can result in back or other injury. 2. Remove the oven from its mounting location (see "Installation Information" in Section 2) and pull it forward so that you can access the top cover. 3. Remove the six screws from the top cover and remove the cover. Top Cover Screws (3 of 6) Blower Blower Motor Oven Shutdown TCO 5. To remove the blower assembly: a) Disconnect the white and gray wires from the blower motor terminals. b) Remove the two screws from the blower brackets. c) Pull back on the blower assembly while rotating it upwards and remove the assembly. Screws Blower Motor Wires Continued on the next page. 4-33