KitchenAid KEBS278SSS Technical Guide - Page 51
Continued on the next
UPC - 883049034867
View all KitchenAid KEBS278SSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
8. Remove the twelve screws from the upper rear cover of the oven and remove the cover. Upper Rear Cover (12 Screws) 11. Set the control subpanel assembly in its place on the front of the oven and hold it in place so it does not fall. NOTE: You will need something approximately 6-8˝ long to prop up the front of the upper oven in step 12. NOTE: You may want to remove upper oven door to lighten the upper oven when lifting in step 12. 12. Lift the front of the upper oven and securely prop it up so that you can access the lower door latch assembly. 9. Remove the four screws from both sides of the oven. Side Screws 2 of 4 Screws) Top Latch Assembly Cover 10. Remove the four screws from the lower oven air vent and remove the vent. 13. Bend and break the two front tabs on the top air duct latch assembly cover. 14. Using a pair of side-cutters, cut the two front joints on the top air duct latch assembly cover, then bend the top and bottom covers up as far as they will go. Top Air Duct Air Vent Screws Top Latch Assembly Cover Cut Here 4-25 Continued on the next page.