KitchenAid KFRS365TSS Installation Instructions - Page 10
Attach Side Shelf on some models, Attach Cabinet Doors on some models, Attach Condiment Shelf - grill model #
View all KitchenAid KFRS365TSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Attach Side Shelf (on some models) 1. Open doors below grill and remove carton. Unpack side shelf. 2. Locate 4 screws. Install 2 screws in the top 2 holes on each side of the grill. Leave screws away from side of grill about ¼" (0.64 cm). Attach Condiment Shelf (on some models) 1. Open cabinet door. 2. Use a short Phillips screwdriver or a 90° screwdriver with a Phillips screw bit to loosen the 2 mounting screws on the inner door panel. A 3. Install side shelf on left side of the grill. Position the side shelf so that the large end of the keyhole slots are over the screws. Place shelf onto the 2 mounting screws. Let the shelf slide down so the screws are in the narrow neck of the slots. A B C A. Mounting screws 3. Position the condiment shelf so that the large ends of the keyhole slots are over the 2 mounting screws. D A. Top of side shelf B. Keyhole slot C. Front of side shelf D. Side of grill 4. Install the bottom 2 screws and tighten. 5. Tighten the top 2 screws. Attach Cabinet Doors (on some models) 1. Remove foam wrapping from both cabinet doors. 2. Position hinge pins on the door with the hinge brackets on the cabinet. Gently push down to slide the pins into place. A B A. Mounting screw in keyhole slot B. Condiment shelf 4. Lower the condiment shelf until the 2 mounting screws are in the narrow ends of the keyhole slots. 5. Tighten the screws. 6. Dispose of/recycle all packaging material. A B A. Door hinge pin B. Hinge bracket 10