KitchenAid KFRS365TSS Installation Instructions - Page 37
Cabinet Door Alignment - Style 2, internal hinge Only, Cabinet Door Removal
View all KitchenAid KFRS365TSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Cabinet Door Alignment - Style 2 (internal hinge) Only Your cabinet doors can be realigned if necessary. 1. Check door to determine alignment requirements. 2. Open the cabinet door. 3. Locate and loosen the 4 door hinge mounting screws ½ turn. To Replace the Door: 1. Position hinge pins on the door with the hinge brackets on the cabinet. Gently push down to slide the pins into place. A A B A. Top screws (2 - underside of frame) B. Bottom screws (2) 4. Adjust the top or bottom of the door in the direction necessary to align the door. 5. Tighten the 4 door hinge mounting screws. 6. Close the door and check alignment. 7. Readjust the door using Steps 2 through 6 if necessary. 8. Repeat Steps 1 through 7 on the other door if necessary. Cabinet Door Removal The door(s) can be removed if necessary to gain access to the inside of the cabinet area below the grill. Style 1 (external hinge pin) To Remove the Door: 1. Open the door. 2. Lift door to slide door hinge pins from hinge brackets on cabinet. B A. Door hinge pin B. Hinge bracket 2. Repeat Step 1 for the other door if necessary. Style 2 (internal hinge) To Remove the Door: 1. Open the door to the full open position. 2. Locate and remove the 4 door hinge mounting screws A B A. Top screws (2 - underside of frame) B. Bottom screws (2) 3. Pull the door away from the center to slide the door hinges out of the slots in the frame. A B A. Door hinge pin B. Hinge bracket 3. Repeat steps 1 and 2 for the other door if necessary. 4. Repeat Steps 1 through 3 for the other door if necessary. 37