KitchenAid KFRS365TSS Installation Instructions - Page 21
Mode 3 - Flame Time™ Feature
View all KitchenAid KFRS365TSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
When the 20 lb LP gas fuel tank is Low: 1. The "Fuel Remaining" indicator light will flash when the gas weight is less than 2.64 lbs (1.2 kg). 2. When gas weight is less than 1.76 lbs (0.8 kg) the display for Fuel Remaining will show 00:00 and a tone will sound 2 times every 20 seconds for five minutes. The fuel shutoff valve will not close, unless the Flame Time™ mode is selected. Mode 2 - Timer The Timer can be set in hours and minutes up to 12 hours and 59 minutes, then counts down the set time. To Set: 1. Press the Mode button until the timer indicator light comes on. 2. Press the Time Set Button to increase the time by 1 minute or press and hold the Time Set button to increase the time rapidly. 3. When desired time is set, press the Start/Reset button once to start the timer countdown. When the set time ends, reminder tones will sound. 4. Press Start/Reset button to reset the Timer or cancel the reminder tones. NOTE: The minute timer will continue counting down until the set time ends or the Start/Reset button is pushed to cancel the timer. Mode 3 - Flame Time™ Feature The Flame Time™ feature automatically shuts off gas to the burners 10 minutes after set time has expired. This feature can be set for 1 to 60 minutes. Flame Time™ can be used to keep grill burning for a set amount of time for grilling or for burn off of the grill grates. For burn off of grill grates With the lid closed and the main burners on HI, residue will burn off the main grill grates. After the grill shuts off and is cool, the grates can be scraped off more easily. The recommended time for burn off is 45 minutes. For Timed Grill "ON" To set the amount of time for grilling, follow the steps the same as burn-off of grill grates except you need to light only the burners you wish to use and adjust the burner knob to desired grill setting. The hood can be up or down depending on your grilling preference. To set Flame Time™ mode for burn-off: 1. Light all main burners and set them on HI and close the hood. 2. Press the "Mode" button until the indicator light for Flame Time™ comes on. 3. Press the "Time Set" button to the amount of time you want the grill to be on. The recommended time for burn off is 45 minutes. 4. Press "Start/Reset" button to start the Flame Time™ feature timer countdown. When the set time ends (00:00), the reminder tone will sound. ■ If the Start/Reset button is pushed within 10 minutes after the Flame Time™ timer reaches 00:00 the fuel shutoff valve will not close automatically. The Flame Time™ timer can be reset and continue the burn-off or timed grill and the timer will count down the new set time. ■ If the Start/Reset button is not pushed within 10 minutes after Flame Time™ timer reaches 00:00 the fuel shutoff valve will close automatically and the display for the Flame Time™ feature will be off. If the mode button is pushed, "E1" will be appear in the display if there is at least one valve still turned on. The tone will sound one time. If Mode button is pushed a second time the Fuel time remaining will be displayed. ■ If the valves are shut off while the Flame Time™ mode timer is counting down, it will stop counting and keep the data. If the start/reset button is pushed when the valves are turned on again, the Flame Time™ timer will continue to count from the last stored data. 5. Press Start/Reset button to cancel this feature or the reminder tones. NOTE: All of the burner valves must be turned to the off position before grill can be lit after a Flame Time™ cycle has been used. When the LP tank is Low: 1. The "Fuel Remaining" indicator light will flash when the gas weight is less than 2.64 lbs (1.2 kg). 2. When gas weight is less than 1.76 lbs (0.8 kg) the fuel shutoff valve will close instantly and "E1" will appear in the display. The indicator light for Flame Time™ mode will be lit. 3. If the gas weight is less than 1.76 lbs (0.8 kg) the Flame Time™ mode will not activate if selected. Lights 1. Press the lights button to turn the lights inside the grill hood "On" or "Off." NOTE: The power supply must be plugged in for lights to work. If lights do not work, see "Outdoor Grill Care" section for changing the light bulbs. 21