Kodak 1886845 User Manual - Page 27
Perform the setup, enter your security information. If you are not sure of your
View all Kodak 1886845 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Using Wi-Fi mode-EX models only Perform the setup 1 Make sure your computer and router are on. 2 Remove all memory cards or other USB devices from your frame. Turn it on. The first time you turn on your frame (after you select your language), the Network connection screen appears. 3 When asked "Do you want to connect your frame to a wireless network?", select Yes, then press OK to begin scanning for available networks. If you select No, you can set up the network later: See Set up your network at a later time, page 21. 4 Select your network from the list of available networks, then press OK. The frame connects to your network and then scans for available computers or other devices. NOTE: If you have network security turned on, you are prompted to enter your security information. If you are not sure of your network information, contact your system administrator or the person who set up your network. 5 Select your home computer from the list, then press OK. 6 When the Setup complete message is displayed, press OK. If you are unable to connect to your network or see your home computer, go to the troubleshooting help on page 29 of this guide or visit www.kodak.com/go/digitalframesupport. www.kodak.com/go/support 20