Kodak 861 2459 User Guide - Page 66
Scanner Control dialog box, Cancel, Multi-Feed Detection, options, Length Detection, Units, Pixels
UPC - 041778612453
View all Kodak 861 2459 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Scanner Control dialog box Selecting the Scanner Control button on the More Scanner Settings dialog box displays the Scanner Control dialog box. Multi-Feed Detection options This dialog box allows you to set multi-feed detection, transport control, enable/disable lamp saver and set the programmable key functions. The settings in this dialog box do not effect the quality of the image. See the section entitled, "Setting scanner controls" later in this chapter. OK saves the values set on the dialog box. Cancel closes the dialog box without saving any changes. Length Detection this option can be enabled or disabled. The default is disabled. If Length Detection is enabled, enter the maximum length. This is the minimum length of the document that can be scanned with a multi-feed being detected. Length detection is used when scanning same-sized documents to check for overlap. For example, if you are scanning 8.5 x 11-inch (A4) documents in portrait mode, you may want to enter a value of 11.25 inches (28.57 cm) in the Maximum Length field. The maximum value is 13.99 inches (35.56 cm). Units - defines the primary measurement system. Pixels, Inches, and Centimeters are available. Auto Set when enabled, will automatically set the maximum length value to .50-inch (1.27 cm) greater than the length of the currently selected page size. Sound - select this option to choose the sound you would like your PC to make to alert you of a multifeed. To choose a sound: 1. Click on the Sound button to display the Open dialog box. 2. Choose the desired .wav file. 3. Click Open on the dialog box and the sound will be saved. A-61512 May 2006 63