Kodak 861 2459 User Guide - Page 71
Cleaning the calibration area, Wipe the upper and lower calibration area again with an almost-dry
UPC - 041778612453
View all Kodak 861 2459 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Cleaning the calibration area 1. Remove dust and debris from this area by using a Staticide wipe or a small brush. Be careful not to scratch the glass when cleaning. IMPORTANT: Staticide wipes contain isopropanol which can cause eye irritation and dry skin. Wash your hands with soap and water after performing maintenance procedures. Refer to the MSDS for more information. 2. Wipe the upper and lower calibration area again with an almost-dry Staticide wipe to remove any streaks. 3. When finished, close the scanner cover. 68 A-61512 May 2006
68
A-61512
May 2006
Cleaning the calibration area
1.
Remove dust and debris from this area by using a Staticide wipe or
a small brush. Be careful not to scratch the glass when cleaning.
IMPORTANT: Staticide wipes contain isopropanol which can cause eye
irritation and dry skin. Wash your hands with soap and
water after performing maintenance procedures. Refer to
the MSDS for more information.
2.
Wipe the upper and lower calibration area again with an almost-dry
Staticide wipe to remove any streaks.
3.
When finished, close the scanner cover.