Kodak DP2000 User's Guide - Page 21
Connecting to a Video Player
View all Kodak DP2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Setting up the Projector Connecting to a Video Player If your video player uses a round, one-prong composite video connector, you'll only need the audio cable, audio adapter, and composite video cable that shipped with the projector. If your video player uses a round, four-prong S-video connector, you'll need an S-video cable in addition to the audio cable and audio adapter. The S-video cable is sold separately. Note: Your video player may have a "Video Out" connector for a coaxial cable connection. Do not use this to connect to the projector. To connect to a video player: 1. Plug the composite video cable yellow connector into the "video-out" connector on your video player. This connector may be labeled "To Monitor." • If you're using an S-video cable, connect it to the "S-video out" connector on the video player. 2. Plug the other yellow connector into the composite video connector on the back of the projector. • If you're using S-video, plug the other end of the cable into the "S-video" connector on the projector. Connecting with composite video cable audio adaptor composite video cable audio cable 15