Kodak DP2000 User's Guide - Page 49
Problem: Only the start-up screen displays, Problem: Image is too wide or narrow for screen, Problem
View all Kodak DP2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Maintenance & Troubleshooting Problem: Only the start-up screen displays • Verify that the cables are connected correctly. See page 12 through page 16 for connection procedures. • Verify that the proper input source is selected. See "Source (keypad only) or Computer and Video (remote control only)" on page 24. • You might need to turn everything off and turn on the equipment again in the proper order. Refer to your computer documentation to determine the correct order. • Make sure your laptop external video port is turned on. See the "Portable and Laptop Activation Chart" on page 49 in this guide or your computer's manual for details. • Make sure your computer video board is installed and configured correctly. • Make sure your computer has a compatible video board. The projector isn't CGA, EGA or SXGA compatible. If you're using Windows 98: 1. Open "My Computer" icon, the Control Panel folder and then the Display icon. 2. Click the Settings tab. 3. Verify that the Desktop area is set to 1024 x 768 or less. Problem: Image is too wide or narrow for screen • Adjust the zoom or projector placement. • Adjust the resolution of your video card if it's greater than 1024 x 768. Problem: Image is out of focus • Turn the projection lens to focus the image. • Make sure the projection screen is at least 5 feet (1.5 m) from the projector. • Check the projection lens to see if it needs cleaning. 43