Kodak LS443 User's Guide - Page 90
Adjust the camera Video Out, setting NTSC or PAL
View all Kodak LS443 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Chapter 9 Camera Problem Cause Solution Picture is not clear. The lens is dirty. Clean the lens (page 96). Subject too close when Move so there is at least 2.0 ft (0.6 taking picture. m) between the camera and the subject, or at least 0.5 ft (15.2 cm) in Close-up mode. Subject or the camera Hold the camera steady while moved while the taking the picture. picture was taken. The subject is too far Move so there is no more than away for the flash to be 10.8 ft (3.3 m) between the effective. camera and the subject; 6.2 ft (1.9 m) in Telephoto. Slide show does not run on external video device. Video Out setting is incorrect. External device is set incorrectly. Adjust the camera Video Out setting (NTSC or PAL, page 58). Refer to the external device's user's guide. Camera freezes Camera detects an up when a card is error when the card inserted or was inserted or removed. removed. Turn the camera off, then back on. Make sure the camera is turned off before inserting or removing a card. 78