Konica Minolta bizhub 283 bizhub 423/363/283/223 Network Administrator User Gu - Page 49
SMTP Authentication
View all Konica Minolta bizhub 283 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
4.3 Sending scanned data by E-mail 4 Item [Proxy Server Address] [Proxy Server Port Number] [User Name] [Password is changed.] [Password] [Address not using Proxy Server] Description To confirm the expiration date via a proxy server, enter its address. Format: *.*.*.* (Asterisk * can be 0 to 255) If the DNS server has already been configured, you can enter the host name instead. When using IPv6, you can specify the IPv6 address. Enter the port number of a proxy server. Enter the user name to log in to the proxy server (up to 63 characters). Select this check box to change the password. Enter the password to log in to the proxy server (up to 63 characters). To enable expiration date confirmation, specify an address that does not use the proxy server depending on your environment. If the DNS server has already been configured, you can enter the host name instead. When using IPv6, you can specify the IPv6 address. Prior check Server address Server port number 4.3.4 SMTP Authentication In the administrator mode of PageScope Web Connection, select [Network] ö [E-mail Setting] ö [E-mail TX (SMTP)]. Item [SMTP Authentication] [User ID] [Password is changed.] [Password] [Domain Name] [Authentication Setting] Description Select this check box to perform SMTP authentication. For SMTP authentication, the authentication method with the highest strength that is supported by the SMTP server is automatically selected from Digest-MD5, CRAM-MD5, PLAIN, and LOGIN. Enter the user ID for SMTP authentication (up to 255 bytes). Select this check box to change the password. Enter the password for SMTP authentication (up to 128 bytes, excluding space and "). Enter the domain name (realm) for SMTP authentication (up to 255 characters). This setting is required when the authentication method is set to Digest-MD5. If there is only one user domain (realm), you do not need to enter this item because the domain name is reported from the SMTP server at initial communication, and with the domain name, a communication is established automatically. If there are two or more user domains (realm), specify the user domain name. For user authentication, select whether to synchronize SMTP authentication with user authentication. Selecting [User Authentication] uses the user name and password for user authentication as those for SMTP authentication. Selecting [Set Value] uses the values specified in [User ID] and [Password]. Prior check Is SMTP authentication requested by the server? Authentication Method Synchronized with user authentication? bizhub 423/363/283/223 4-12