Konica Minolta bizhub 363 bizhub 423/363/283/223 Enlarge Display Operations Us - Page 40

4.1 General fax/scan operation 4 4 4.1 How to use Fax/Scan mode This section describes the basic fax/scan operations in the enlarge display mode. d Reference For details on the fax and scan operations, refer to the [User's Guide Network Scan/Fax/Network Fax Operations]. General fax/scan operation The following describes the general fax/scan operation. 0 Register addresses using the setting menu, and configure the fax and network settings and register ad- dresses in Administrator Settings in advance. For details, refer to the [User's Guide Network Administrator] and the [User's Guide Network Scan/Fax/Network Fax Operations]. 1 Press the Fax/Scan key, and then the Enlarge Display key on the Control Panel. The enlarged display screen for Fax/Scan mode appears. 2 Load the original. For details on loading originals, refer to page 2-13. 3 Specify the destination. % For details on specifying a destination, refer to page 4-4. % If the destination was incorrectly specified, press the C (clear) key, and then specify the destination again. bizhub 423/363/283/223 4-2