Konica Minolta bizhub 40P/40PX bizhub 40P User Manual - Page 129
Turn off the printer and discon, nect the power cord., Lift the lever shown in
View all Konica Minolta bizhub 40P/40PX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
1 Turn off the printer and discon- nect the power cord. " There are extremely hot parts within the machine. Before replacing the fuser unit, wait about 30 minutes after turning off the machine, and then check that the fusing section has reached room temperature; otherwise, you may get burnt. 2 Lift the lever shown in the figure. 3 Open the rear cover. " Do not touch any parts inside the printer. Replacing Consumables 119
Replacing Consumables
119
1
Turn off the printer and discon-
nect the power cord.
There are extremely hot
parts within the machine.
Before replacing the
fuser unit, wait about 30
minutes after turning off
the machine, and then
check that the fusing sec-
tion has reached room
temperature; otherwise,
you may get burnt.
2
Lift the lever shown in the figure.
3
Open the rear cover.
Do not touch any parts
inside the printer.