Konica Minolta bizhub 40P/40PX bizhub 40P User Manual - Page 138
shaft on the tray., roller and slowly push it into
View all Konica Minolta bizhub 40P/40PX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
4 While pushing down the shaft of the feed roller, widen the tab of the feed roller to loosen it (1) and then slowly remove the feed roller from the shaft on the tray (2). 5 Hold the tab on the new feed roller and slowly push it into the shaft on the tray. 6 Aligning the small tabs on the feed roller with the slots of the shaft, push the feed roller completely in so that the tab fits into the slot. 128 Replacing Consumables
Replacing Consumables
128
4
While pushing down the shaft of
the feed roller, widen the tab of
the feed roller to loosen it (1)
and then slowly remove the feed
roller from the shaft on the tray
(2).
5
Hold the tab on the new feed
roller and slowly push it into the
shaft on the tray.
6
Aligning the small tabs on the
feed roller with the slots of the
shaft, push the feed roller com-
pletely in so that the tab fits into
the slot.