Konica Minolta bizhub 40P/40PX bizhub 40P User Manual - Page 182

Symptom Cause Solution Printing from The file format (file Only files with the format (extension) a USB mem- extension) is not one for JPEG, TIFF, XPS, or PDF are sup- ory device is that can be printed. ported. not possible. MEMORY DIRECT Change the setting for INTERFACE for the printer is set to MENU/MEMORY DIRECT to DISABLE. ENABLE. A public user is not specified for user authentication. Contact the printer administrator. Printing takes too much time. The printer is set to a It takes more time to print on special slow printing mode media. When using regular paper, (for example, thick make sure that the media type is set stock or transpar- properly in the driver. ency). The printer is set to Energy Saver mode. It takes time for printing to start in Energy Saver mode. If you do not want to use this mode, disable it. (SYS DEFAULT MENU/ENERGY SAVER menu) The job is very com- Wait. No action needed. plex. The printer memory is Add more memory. insufficient. A toner cartridge for a Install a correct KONICA MINOLTA different region or an toner cartridge approved for your speunapproved genuine cific printer. toner cartridge is installed. Blank pages The toner cartridge come out may be defective or during print- empty. ing. The wrong media is being used. Check the toner cartridge. The image will not print if it is empty. Check that the media type set in the driver matches the media loaded in the printer. 172 Solving Other Problems