Konica Minolta bizhub C3100P bizhub C3100P Introduction User Guide - Page 32

5.1 Paper Paper feed port Tray 1 Lower Feeder Unit (Tray 2) Auto Duplex Unit 5 Allowable sizes A4, A5, A6, B5 (JIS), B6 Letter (8-1/2 e 11), Executive (7-1/4 e 10-1/2), Statement/Invoice (5-1/2 e 81/2) 16K, Kai 16, Kai 32, Postcard (100 mm e 148 mm), Reply postal card (148 mm e 200 mm) Photo Size 4 e 6 UK Quarto (8 e 10), Government letter (8 e 10-1/2) Width: 3-5/8 to 8-1/2 (92 mm to 216 mm), Length: 5-13/16 to 11-11/16 (148 mm to 297 mm) A4, B5 (JIS) Legal (8-1/2 e 14), Letter (8-1/2 e 11), Executive (7-1/4 e 10-1/2), Government legal (8-1/2 e 13) A4, B5 (JIS) Legal (8-1/2 e 14), Letter (8-1/2 e 11), SP Folio (8-1/2 e 12-11/16), Executive (7-1/4 e 10-1/2) Foolscap (8 e 13), 8-1/8 e 13-1/4, Folio (8-1/4 e 13), Government legal (8-1/2 e 13), 8-1/2 e 13-1/2, 16K Government letter (8 e 10-1/2), UK Quarto (8 e 10), Kai 16 Width: 7-3/16 to 8-1/2 (182 mm to 216 mm), Length: 10-1/8 to 14 (254 mm to 356 mm) Tips - The area, excluding 3/16 inches (4.2 mm) from the paper edge, is used as the printable area on all paper sizes. When configuring a user setting of the page size using the application, specify the paper size within the printable area so that the optimal result is obtained. - On an envelope, it is only possible to print on the front (address) side. Also, the result of printing on the seal overlapping part on the front side cannot be assured. The area that cannot be assured varies depending on envelope types. - The page margin setting is determined depending on your application. If the default paper size or margin is selected, there may be some part of the paper that is not able to be printed on. To obtain the optimal result, configure the custom size setting so that an image is included in the printable area of this machine. - Specify the custom size in the range of the numeric values shown in the table above using the printer driver. - When custom-size paper over width 8-1/4 inches (210 mm) and length 11 inches (279 mm) is used in Tray 1, its trailing edge is loaded in the bent state due to the tray structure (Maximum length 11-11/16 inches (297 mm)). To load such custom-size paper, use the Manual Feed Tray or load up to 100 sheets in Tray 1. - In Mac OS X environment, the maximum size of the Manual Feed Tray that can be used for 2-sided printing is "width 8-1/2 inches (216 mm) e length 14 inches (355 mm)". 5.1.3 Precautions for correct operations Unavailable paper Do not load the following types of paper into the tray. Not observing these precautions may lead to reduced print quality, a paper jam, or machine damage. - Paper that has been printed on using a heat-transfer printer or an inkjet printer - Folded, curled, wrinkled, or torn paper - Paper that has been left unwrapped for a long period of time - Paper that is damp, perforated, or that has been hole punched - Extremely smooth or extremely rough paper, or paper with an uneven surface - Treated paper such as carbon-backed paper, thermal paper, pressure-sensitive paper, or iron-on transfer paper - Paper that has been decorated with foil or embossing - Paper of a non-standard shape (paper that is not rectangular) - Paper that is bound with glue, staples or paper clips - Paper with labels attached [Introduction] 5-3