Konica Minolta bizhub C3100P bizhub C3100P Introduction User Guide - Page 40
PAPER MENU] - [PAPER SOURCE] - [TRAY 2], Loading paper into Tray 2, Tray 2, Control Panel, Menu/Select
View all Konica Minolta bizhub C3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5.4 Loading paper into Tray 2 5 4 Load paper into the tray with the print side facing up. % For details on the available paper sizes, refer to page 5-2. NOTICE Do not load the sheets up to the point where the top of the stack is higher than the , mark. If paper is curled, flatten it before loading. 5 Align the paper guide to the paper size. 6 Close Tray 2. 7 If necessary, change the paper type on the Control Panel. % To configure settings: Menu/Select - [PAPER MENU] - [PAPER SOURCE] - [TRAY 2] % The paper size is automatically set. [Introduction] 5-11
[Introduction]
5-11
5.4
Loading paper into Tray 2
5
4
Load paper into the tray with the print side facing up.
%
For details on the available paper sizes, refer to page 5-2.
NOTICE
Do not load the sheets up to the point where the top of the stack is higher than the
,
mark.
If paper is curled, flatten it before loading.
5
Align the paper guide to the paper size.
6
Close
Tray 2
.
7
If necessary, change the paper type on the
Control Panel
.
%
To configure settings:
Menu/Select
- [PAPER MENU] - [PAPER SOURCE] - [TRAY 2]
%
The paper size is automatically set.