Konica Minolta bizhub C3100P bizhub C3100P Introduction User Guide - Page 38
PAPER MENU] - [PAPER SOURCE] - [TRAY 1], Loading paper into Tray 1, Tray 1, Control Panel, Menu/Select
View all Konica Minolta bizhub C3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
5.3 Loading paper into Tray 1 5 4 Load paper into the tray with the print side facing up. % For details on the available paper sizes, refer to page 5-2. % Load a postcard or reply postal card, turning the short side to the right-hand side of the tray. NOTICE Do not load the sheets up to the point where the top of the stack is higher than the , mark. If paper is curled, flatten it before loading. 5 Align the paper guide to the paper size. 6 Close Tray 1. 7 Change the paper type and paper size on the Control Panel. % To configure settings: Menu/Select - [PAPER MENU] - [PAPER SOURCE] - [TRAY 1] [Introduction] 5-9
[Introduction]
5-9
5.3
Loading paper into Tray 1
5
4
Load paper into the tray with the print side facing up.
%
For details on the available paper sizes, refer to page 5-2.
%
Load a postcard or reply postal card, turning the short side to the right-hand side of the tray.
NOTICE
Do not load the sheets up to the point where the top of the stack is higher than the
,
mark.
If paper is curled, flatten it before loading.
5
Align the paper guide to the paper size.
6
Close
Tray 1
.
7
Change the paper type and paper size on the
Control Panel
.
%
To configure settings:
Menu/Select
- [PAPER MENU] - [PAPER SOURCE] - [TRAY 1]