Konica Minolta bizhub C3110 bizhub C3110 Quick Start User Guide - Page 53
Initial Settings of This Machine
View all Konica Minolta bizhub C3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
5 Preparation for network connection (for administrators) 5.1 5 Initial Settings of This Machine 5.1 Preparation for network connection (for administrators) Checking a LAN cable for connection Check that a LAN cable connected to the network is connected to the LAN port of this machine. For details on the cable connection port, refer to page 3-3. Assigning an IP address If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway address. In the Control Panel, select [UTILITY] - [Admin Settings] - [ETHERNET] - [TCP/IP] - [IPv4 Settings], then configure the following settings. Settings [IP ADDRESS] [SUBNET MASK] [DEFAULT GATEWAY] [IP App Auto Setg] Description When manually specifying the IP address, enter the fixed IP address assigned to the machine. When manually specifying the IP address, enter the subnet mask. When manually specifying the IP address, enter the default gateway. When automatically specifying the IP address, select the method for automatic retrieval. • [DHCP]: [ON] is specified by default. • [BOOTP]: [OFF] is specified by default. • [ARP/PING]: [OFF] is specified by default. • [AUTO IP Settings]: Fixed to [ENABLE]. Tips - To check the IP address assigned to this machine, print out the Configuration Page. To print out the Configuration Page, select [REPORT/STATUS] - [REPORT] - [Configuration Page] on the main screen. Initial Settings of This Machine Chapter 5 5-2 [Quick Start Guide]