Konica Minolta bizhub C550 LK-101/LK-102 License Authentication Operation Guid - Page 62
Gather necessary information, Get [Request Code] and [Serial Number] from MFP panel <Service Mode
View all Konica Minolta bizhub C550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
1. Gather necessary information 1-1. Get [Request Code] and [Serial Number] from MFP. Acquisition procedure: MFP panel •MFP panel •PSWC 2. Prepare Initialization 3. Perform Initialization • Get [Request Code] and [Serial Number] from MFP panel . a) Enter in Service Mode, and then press "Stop","9". The "Billing Setting" screen will appear. Select [License Management]. b) Select [Request Code]. c) Print out displayed [Request Code] and [Serial Number], or write them down. If you press Start button, they are printed out. *Please pay attention "U" and "V", "0 (number)" and "O (alphabet)". "0 (number)" is not used in [Request Code]. d) Exit from Service Mode and go on to the next step [2. Prepare Initialization]. Issued by BT-CSO 62 Ver 1.03
Issued by BT-CSO
Ver 1.03
62
1. Gather necessary information
1-1. Get [Request Code] and [Serial Number] from MFP.
Acquisition procedure
:
MFP panel <Administrator Mode>
•
MFP panel <Service Mode>
•
PSWC
2. Prepare Initialization
3. Perform Initialization
•
Get [Request Code] and [Serial Number] from MFP panel <Service Mode>.
a) Enter in Service Mode, and then press
“Stop”,”9”. The “Billing Setting” screen will
appear.
Select [License Management].
b) Select [Request Code].
c) Print out displayed [Request Code] and
[Serial Number], or write them down.
If you press Start button, they are printed out.
*Please pay attention “U” and “V”, “0 (number)”
and “O (alphabet)”.
“0 (number)” is not used in [Request Code].
d) Exit from Service Mode and go on to the
next step [2. Prepare Initialization].