Kyocera ECOSYS FS-C8650DN FS-C8650DN Driver Guide - Page 11
Custom Installation, Installing in Custom Mode with a Network Connection using Discover, Discover
View all Kyocera ECOSYS FS-C8650DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation With Enable Status Monitor selected, you can select this additional option to have Status Monitor display a message on your computer when a print job finishes printing. The default is the notification is not displayed (check box cleared). This option is also available in Advanced > Status Monitor. Note: With a USB connection and Status Monitor on, the message appears when printing finishes whether the Notify when printing is complete check box is selected or cleared. Device Settings Select the Device Settings check box to open Device Settings where you can choose installed options for your printing system. (The Device Settings check box appears only in Windows XP with a network connection.) When the installation completes successfully, click Finish to exit the installation wizard. A message may appear if there is a software installation failure. Click Finish, and retry the installation. If the same message appears again, contact your system administrator. The installation of the printer is now complete. If prompted, restart your computer. Custom Installation Custom Mode applies to driver installation for a USB or network connection. The installation wizard can discover printers that are turned on, and connected by USB and network cable, or you can manually select the driver from drivers that are available. You can specify the printer port, fonts, and the utilities you want to install. Printer drivers that ship with Windows operating systems are called minidrivers. The minidriver is available separately for PCL and KPDL and provides basic support for your printer. The KX XPS driver is only available for printing systems used with Windows 7, Windows Vista, or Windows Server 2008. The XPS driver is discussed in the Device Settings chapter. Minidriver functionality is not documented in this user guide. Installing in Custom Mode with a Network Connection using Discover This section describes the custom installation procedure of the driver software in Windows operating systems using a network connection. 1 Ensure that your printer and computer are connected to a network. 2 On the Installation Method page, select Custom Mode. 3 The Discover Printing System page opens searching for your printing system. The Discover button is automatically selected. A list of models appears. Click Next. If Discover does not find your printing system, a message appears. Remove and reinsert the network cable, and ensure it is connected properly. Click Refresh to retry the discovery. If the system still cannot find your printing system, contact your system administrator. Printer Driver 1-4