Kyocera FS-1800N FS-1800/3800 Installation Manual Rev 1.3 - Page 14
the paper guides., will fit under the load limits
View all Kyocera FS-1800N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
B5 Release A4 Paper Stopper 5 Adjust the position of the paper stopper located at the rear of the paper cassette. Pull the release lever and slide the paper stopper to the desired paper size. When shipped from the factory, the paper cassette is set to either A4 or Letter size. When using other size paper, move the paper guides and paper stopper all the way out, insert the paper, then adjust the paper guides and paper stopper to the size of the paper. Adjust them so that they are in light contact with the paper. 6 Make sure that the edges of the paper are aligned. Slide the paper into the paper cassette. Load Limit 12 Load Limit • Do not load more paper than will fit under the load limits on the paper guides. • The paper cassette will hold approximately 500 sheets of paper with a 80 g/m² (21 lb.) basis weight, or with a thickness of 0.11 mm.