Kyocera KM-3530 Printing System (N) Operation Guide (Setup Edition) - Page 92
Paper settings
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
4. Selecting the Printer Settings 4-7 Paper settings About the paper settings It is possible to perform paper settings for the 5 items shown in the following chart. For the most efficient use of the printer functions, select the various settings according to your printing needs. Item 1 Bypass mode If "First" is selected here and there is paper set in the bypass table, paper feed will be accomplished from the bypass table. 2 Paper Feed Source Selects the paper cassette that will be selected first. 3 Duplex mode 4 Stack select Selects where the printing paper will be ejected. 5 A4/Letter (8 1/2 x 11) usage ON/OFF Allows both A4 and Letter (8 1/2 x 11) size paper to be utilized as though they were the same size. Available settings Cassette, First Remarks Bypass Cassette1 Cassette2 Cassette3 Cassette4 Cassette 3 and Cassette 4 are displayed only when they are installed. None, Short edge bind, Long edge bind Displayed only when the optional Duplex Unit is installed. Inner tray, Job separator, Finisher main tray, Finisher sub tray, Mailbox (Face-Up), Mailbox (Face-Down) Units other than the inner tray are displayed only when the optional Job Separator or the Finisher is installed. OFF, ON 4-23