Kyocera KM-6030 DF-650/MT-1/BF-1/PH-4A Operation Guide (Multi-Language) - Page 22
Emptying the Waste Hole Punch Box, English, DF-650, MT-1A, BF-1A, PH-4A AND PH-4C OPERATION GUIDE
View all Kyocera KM-6030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
English Emptying the Waste Hole Punch Box If the message "Empty waste punch box" displays, the scraps in the waste hole punch box require emptying. Leave the main power switch on your copier switched ON ( | ) while performing this procedure. 1 Grasp the front cover handle and open the front cover. 2 Grasp the waste hole punch box handle and remove the box from the Document Finisher. 3 Dispose of the hole punch scraps appropriately. 4 Re-install the waste hole punch box. Align it with the guides in the Document Finisher. 5 Close the front cover. 1-18 DF-650, MT-1(A), BF-1(A), PH-4A AND PH-4C OPERATION GUIDE
English
1-18
DF-650, MT-1(A), BF-1(A), PH-4A AND PH-4C OPERATION GUIDE
Emptying the Waste Hole Punch Box
If the message "Empty waste punch box" displays, the scraps in the waste hole
punch box require emptying.
Leave the main power switch on your copier switched ON ( | ) while performing this
procedure.
1
Grasp the front cover handle and open the
front cover.
2
Grasp the waste hole punch box handle and
remove the box from the
Document
Finisher
.
3
Dispose of the hole punch scraps
appropriately.
4
Re-install the waste hole punch box. Align it
with the guides in the
Document Finisher
.
5
Close the front cover.