Kyocera TASKalfa 2420w TASKalfa 2420w Operation Guide - Page 51

J-1300 / 1400 Door Open while printing, will show J-1300 Exit Cover / J-1400 Upper Unit.

Get Kyocera TASKalfa 2420w PDF manuals and user guides View all Kyocera TASKalfa 2420w manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

3. 1. 6 J-1300 / 1400 Door Open while printing If the Exit Cover or the Upper Unit is open while the printer is processing a print job, the UI screen will show J-1300 (Exit Cover) / J-1400 (Upper Unit). For clearing J-1400, please start on the step 3. 1. Hold the blue handle (1) and open the Exit Cover (2). 1 2 2 2. If it is possible, pull and remove the mis-feed media. If little amount of the leading edge area is coming to the Fuser and you cannot pull it out, or if the trailing edge remains deep to be caught in the printer, do not pull it by force. Leave it there and go to the next step. WARNING There are extremely hot parts inside the Fuser Unit. Do not touch any parts in the Fuser Unit, or you will be burnt. Also the mis-fed media can be very hot. Be careful not to get burnt when you remove it. 3. Press down the blue levers (3) on both sides to unlock and open the Upper Unit. 3 3 3-13 Chapter 3 Error Correction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Chapter 3
Error Correction
3-13
3. 1. 6
J-1300 / 1400
Door Open while printing
If the Exit Cover or the Upper Unit is open while the printer is processing a print job, the UI screen
will show J-1300 (Exit Cover) / J-1400 (Upper Unit).
For clearing J-1400, please start on the step 3.
1. Hold the blue handle (1) and open the Exit Cover (2).
2. If it is possible, pull and remove the mis-feed media.
If little amount of the leading edge area is coming
to the Fuser and you cannot pull it out,
or if the trailing edge remains deep to be caught in
the printer, do not pull it by force.
Leave it there and go to the next step.
3. Press down the blue levers (3) on both sides to unlock and open the Upper Unit.
3
3
WARNING
There are extremely hot parts inside the Fuser
Unit. Do not touch any parts in the Fuser Unit, or
you will be burnt.
Also the mis-fed media can be very hot. Be
careful not to get burnt when you remove it.
1
2
2