Kyocera TASKalfa 500ci Fax System (Q) Operation Guide Rev-1 - Page 35

Ready to send. FAX No. Entry Pause Space Add a new FAX destination. Enter FAX number with the numeric keys. Backspace Add to Addr Book Status Next Dest. Cancel Destination 0 Sub Address Transmission Start Speed ECM Encrypted Transmission On Hook OK 10/10/2008 10:10 Ready to send. FAX No. Entry Pause Space Add a new FAX destination. Enter FAX number with the numeric keys. Backspace Add to Addr Book Status Next Dest. Cancel Destination 0 Sub Address Transmission Start Speed ECM Encrypted Transmission On Hook OK 10/10/2008 10:10 FAX Operation (Basic) 2 Enter the fax number of the receiving system using the numeric keys. NOTE: Up to 64 digits can be entered as the fax number of the receiving system. Press [Space] to enter a space. Use [ ] or [ ] to move the cursor. 3 To correct the fax number, press [Backspace] on the touch panel, and delete the digits one by one before reentering the fax number. To delete the number entirely, press the Clear key on the operation panel. When [Add to Addr Book] is displayed, you can register entered contents to the Address Book. [Pause] Pressing this key adds about three seconds of waiting time during dialing. For example, when dialing the receiving system on an external line, you can use this method to insert a pause before resuming dialing after you dial a specific number. 3 If necessary, make any detailed settings. Press each key to change the setting, and press [OK]. Key Sub Address Transmission Start Speed Description To communicate using the sub address, press this key. For details, refer to Sub Address Communication on page 4-37. To change the transmission start speed, press this key. Select the speed from 33,600 bps, 14,400 bps, and 9,600 bps. OPERATION GUIDE 3-7