LG 43UL3G-B User Guide

LG 43UL3G-B Manual

Get LG 43UL3G-B PDF manuals and user guides View all LG 43UL3G-B manuals
Add to My Manuals
Save this manual to your list of manuals

LG 43UL3G-B manual content summary:

  • LG 43UL3G-B | User Guide - Page 1
    USER MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operation and retain it for future reference. webOS 4.1 www.lg.com
  • LG 43UL3G-B | User Guide - Page 2
    Wall] [On/Off Scheduler] [SI Server Setting] [Server Setting] [Fail Over] [Status Mailing] [Play via URL] [Setting Data Cloning] [Sync Mode] [LG ConnectedCare (Signage 365 Care)] [Multi Screen] [Leveler Tool] [Office Meeting Mode] --General 30 [Language] [System Information] [Set ID] [Time & Date
  • LG 43UL3G-B | User Guide - Page 3
    Manual Calibration] IR CODE 76 CONTROLLING MULTIPLE PRODUCTS 78 --Connecting cables 78 --Communication Parameter 79 --Command Reference List 80 --Transmission/Reception Protocol 85 TROUBLESHOOTING please visit https://opensource.lge.com. LG Electronics will also provide open source code
  • LG 43UL3G-B | User Guide - Page 4
    ENGLISH 4 SAFETY PRECAUTIONS The safety precautions are intended to prevent unexpected danger or harm by helping the user to use the product safely and for its intended purpose. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
  • LG 43UL3G-B | User Guide - Page 5
    WARNING •• Use only the power cord or AC adapter provided or approved by LG Electronics, Inc. If you use another power cord, make sure that it is faulty in any way, please contact the manufacturer or the nearest authorized service center for a replacement. •• Operate the display only from a power
  • LG 43UL3G-B | User Guide - Page 6
    ENGLISH 6 •• If water or any foreign substance goes inside the product, disconnect the power cord immediately and contact the service center. -- Otherwise, this may cause a fire or electric shock due to damage to the product. •• Keep the power cord or AC adapter away from any
  • LG 43UL3G-B | User Guide - Page 7
    exceeding 100 Kg) -- If use the damaged product again, contact the service center because it can cause electric shock or fire. •• Do not hold it upside down while holding only the stand. (It is for stand supported models only.) -- This may cause stand warping, panel damage and other types
  • LG 43UL3G-B | User Guide - Page 8
    It can cause injury to human, problem to product and damage the display. earthquake. -- You must refer to the manual provided. •• Prevent Children from climbing or unplug the power cord and contact the service center. -- If you continue to safely and securely support the product to remain in place
  • LG 43UL3G-B | User Guide - Page 9
    's picture quality, life cycle, and appearance. Please check with service engineer before installing. Please do not install the product in places •• Install the product on a flat and stable place that is large enough to support the product. -- If the product is dropped, you may be injured or the
  • LG 43UL3G-B | User Guide - Page 10
    dust, it can cause fire or product damage. •• When you need to clean the inside of the product, you must contact the service center. -- Otherwise, cleaning without support may cause a fire, electric shock, or damage to the product. •• When cleaning the product, unplug the power cord and wipe gently
  • LG 43UL3G-B | User Guide - Page 11
    . Switch it off immediately, unplug it from the power outlet and contact the service center. -- Otherwise, the product may cause fire or electric shock. •• Do impact on the product or screen. -- It can cause injury to human, problem to product and damage the screen. •• If you can smell smoke or other
  • LG 43UL3G-B | User Guide - Page 12
    use without taking proper measures, electrical shock or fire can occur. Contact the service center. •• Keep small accessories out of the reach of children. -- If at the product or screen. -- It can cause injury to human, problem to product and damage the screen. •• All the power sources must be
  • LG 43UL3G-B | User Guide - Page 13
    ENGLISH 13 Precautions for Using the Remote control WARNING •• Avoid places with high humidity. -- It may cause electrical shock or damage the product. •• Do not expose batteries to excessive heat, such as direct sunlight, open fireplace, and electric heaters. -- It may cause fire and you may be
  • LG 43UL3G-B | User Guide - Page 14
    ENGLISH 14 Precautions for Experiencing Image Retention •• Displaying a still image for a prolonged period of time may cause damage to the screen, resulting in image retention. Most third-party products have the same issue. The resulting damage is not covered by the product warranty. -- Use a
  • LG 43UL3G-B | User Guide - Page 15
    the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries control sensor on the monitor. •• Some features of the remote control may not be supported in certain models. •• The product's internal and external batteries should not be exposed
  • LG 43UL3G-B | User Guide - Page 16
    . (Volume Up/Down Button) Adjusts the volume level. Selects the screen size. Automatically adjusts picture position and minimizes image instability. (This is supported only for the RGB input.) (MUTE) Mutes all sounds. Adjusts the brightness of the display. Moves to the previous or next screen.
  • LG 43UL3G-B | User Guide - Page 17
    . Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves your input and exit menus. SuperSign menu key. (This function is not supported.) , After selecting the menu, select and adjust functions. (BACK) Returns to the previous level. Closes the menu. Allows you to control various
  • LG 43UL3G-B | User Guide - Page 18
    you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. This monitor supports the * feature. * : a feature that enables a PC to recognize devices attached by the user
  • LG 43UL3G-B | User Guide - Page 19
    -- High Speed HDMI®/™ Cable with Ethernet •• If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to manually change the default audio output to HDMI. •• If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode. •• You
  • LG 43UL3G-B | User Guide - Page 20
    is certified to DP 1.1a standard or higher. •• Daisy chaining the video output may be limited depending on the performance of the input device that supports HDCP.
  • LG 43UL3G-B | User Guide - Page 21
    without prior notice due to upgrades of the product functions. •• Some features described in the User Manual may not be supported in certain models and countries. •• SNMP 2.0 is supported. SETTINGS Home Global Buttons •• [MOBILE URL]: Provides information necessary to access the monitor set through
  • LG 43UL3G-B | User Guide - Page 22
    ENGLISH 22 Ez Setting [Video Wall] [Ez Setting] [Video Wall] Set Video Wall options to create a wide visual canvas. •• [Tile Mode]: Turn [Tile Mode] on or off. •• [Tile Mode Settings]: Display a single integrated screen on multiple Signage monitors. •• [Simple Configuration]: automatically sets [
  • LG 43UL3G-B | User Guide - Page 23
    is playing at regular intervals, this feature will play back the file. (OLED model is not supported.) --> Capture time Interval: The time interval can be set to 30 min, 1 hour, 2 hours and 3 hours. -- [Manual]: When the automatic input switches due to the image and video file being uploaded, the
  • LG 43UL3G-B | User Guide - Page 24
    movement or shock caused by the external environment, an e-mail is sent to you. •• Only SMTP ports 25, 465, and 587 are supported. •• The occurrence of internal input switches, excluding external input switches (RC, RS232C, SuperSign), are considered as Fail Over Status. •• One email containing
  • LG 43UL3G-B | User Guide - Page 25
    25 ENGLISH [Play via URL] [Ez Setting] [Play via URL] Play content you want to play automatically through the built-in web browser. •• [URL Loader]: Turns [Play via URL] on or off. •• [Set URL]: Enter the URL address to display automatically. •• [Preview]: Preview your desired website by accessing
  • LG 43UL3G-B | User Guide - Page 26
    365 Care)] You can install the LG ConnectedCare (fault diagnosis) solution for fault diagnosis and prediction service. •• [Install]: Installs the LG ConnectedCare solution. 1) [ENTER ACCOUNT NUMBER]: Enters the 6-digit account number to install the LG ConnectedCare solution. -- Account Number: The
  • LG 43UL3G-B | User Guide - Page 27
    on a single screen. PIP Mode PBP Mode 3-Screen Split Mode 4-Screen Split Mode NOTE •• In multi-screen mode, the DP daisy chain feature is not supported. •• The number of split screens you can have may vary depending on the model. Selecting Screen Layout When you enter multi-screen mode without
  • LG 43UL3G-B | User Guide - Page 28
    H.264 4K VP9 •• The limitations of 3 and 4-screen split are as below. When Using 4K It supports only up to 2 videos. A combination of max. 4K @ 60 fps + 2K @ 60 fps is available. However, H.264 4K supports max. 30 fps. When Using Only 2K 60fps You can combine up to 1 MPEG2, 2 H.264, and
  • LG 43UL3G-B | User Guide - Page 29
    set functions related to the conference room meeting mode. •• Meeting Guide Screen -- Meeting Guide Screen: Turning on this feature will allow you to use the -- Picture Mode: Set the same picture mode for all external input supported by this product. -- Input Auto Switching: When an external input
  • LG 43UL3G-B | User Guide - Page 30
    Screen] will display the downloaded image first when there is no signal. •• If using the [Meeting Room Name] and [Time] items in the [Meeting Guide Screen], and if using the downloaded image as the No Signal image, it is recommended to use a brightly-colored image in accordance with the optimal
  • LG 43UL3G-B | User Guide - Page 31
    ENGLISH 31 [Power] [General] [Power] Power-related feature settings [No Signal Power Off (15 Min)] Set whether to use the 15 Min Auto Off feature. •• You can set this option to [On] or [Off]. •• If you set this feature to [On], the product turns off after it's remained in No Signal status for 15
  • LG 43UL3G-B | User Guide - Page 32
    ENGLISH 32 [PM Mode] •• [Power Off (Default)]: Set the normal DC off mode. •• [Sustain Aspect Ratio]: The PC retains the Extended Display Identification Data (EDID) even when the power is off. •• [Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), or
  • LG 43UL3G-B | User Guide - Page 33
    available wireless Internet networks. •• [Add a Hidden Wireless Network]: You can add a wireless network by manually typing in its name. •• [Connect via WPS PBC]: Press the button on the wireless router that supports PBC to easily connect to the router. •• [Connect via WPS PIN]: Enter the PIN number
  • LG 43UL3G-B | User Guide - Page 34
    a Wi-Fi connection without a wireless router and use wireless Internet. •• The SoftAP and ScreenShare features cannot be used at the same time. •• On models that support Wi-Fi dongles, the SoftAP menu is enabled only when a Wi-Fi dongle is connected to the product. •• Wi-Fi Channel: You can directly
  • LG 43UL3G-B | User Guide - Page 35
    terms of service. For details, contact your ISP. •• LG is not responsible for any malfunction of the display or Internet connection failures due to communication errors/ malfunctions associated with your Internet connection or other connected equipment. •• LG is not responsible for problems within
  • LG 43UL3G-B | User Guide - Page 36
    Wi-Fi devices. •• The wireless network service may run slowly depending on the surrounding wireless devices correctly by referring to their user guides before configuring the network connection. •• when the current input is No Signal.) (It only supports the models for exterior use.) •• [White Wash]:
  • LG 43UL3G-B | User Guide - Page 37
    storage device. •• Delete the existing images stored on internal memory before downloading a new image file. •• Supported image file formats: BMP, JPG, JPEG and PNG •• You can download up to 4 images. (Supports resolutions of 1920 x 1080 or lower) •• If a bar image is deleted or does not exist, the
  • LG 43UL3G-B | User Guide - Page 38
    the existing contents stored on the internal memory before downloading a new video file. •• Supported video file formats: "MP4", "AVI", "FLV", "MKV", "MPEG", "TS video [Audio Guidance] If Audio Guidance is set to On, audio guides will be provided in various situations, such as when you adjust the
  • LG 43UL3G-B | User Guide - Page 39
    /Off Toggle): enables the Beacon feature. •• The LG Beacon/iBeacon/Eddystone Type Beacon features are supported. •• iBeacon -- Beacon UUID (hex): Set the apply the Beacon settings. NOTE •• Some models do not support background screening services in iOS. •• A reboot is recommended for the settings to
  • LG 43UL3G-B | User Guide - Page 40
    •• Depending on the model, it can be displayed as [PC/OPS Control]. •• Depending on the supported interface, the sub-menu of [Control Interface Selection] may be different. •• The PC products that support the power control are MP500/MP700, and you have to purchase them separately if necessary. •• If
  • LG 43UL3G-B | User Guide - Page 41
    PC or DTV label for each external input. [SIMPLINK Setup] •• When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage. •• [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E]. •• [Standby]: Sets the scenarios
  • LG 43UL3G-B | User Guide - Page 42
    •• [Quiet Mode]/[Indoor Mode] is available only for indoor use. •• The quality is not guaranteed when [Quiet Mode]/[Indoor Mode] is applied outdoors. [LG promota] This feature allows connection of promota app on mobile device. For more information on how to use it, please visit the promota website
  • LG 43UL3G-B | User Guide - Page 43
    School], [Control Room]: displays the mode optimized for the installing environment. •• [Calibration]: Allow an expert, or anyone who loves picture quality, to manually tune to the best picture quality. NOTE •• The type of [Picture Mode] you can select may vary depending on the model or input signal
  • LG 43UL3G-B | User Guide - Page 44
    ENGLISH 44 [Customize] •• [Backlight]: Adjust the brightness of the screen by adjusting the brightness of the backlight. The closer the value is to 100, the brighter the screen is. •• [OLED Light]: Adjusts the brightness of the LED panel to control the brightness of the screen. •• [LED Light]:
  • LG 43UL3G-B | User Guide - Page 45
    ENGLISH 45 •• [Picture Option]: Customize the picture options. -- [Noise Reduction]: Remove randomly popping dots to make the picture look clearer. -- [MPEG Noise Reduction]: Reduce the noise generated in the process of creating a digital video signal. -- [Black Level]: Adjust the brightness and
  • LG 43UL3G-B | User Guide - Page 46
    is enabled, the PIP mode of the multi-screen is unavailable. NOTE •• Depending on the model, the automatic screen rotation feature may not be supported. [External Input Rotation] •• This feature rotates the screen clockwise. •• You can set this feature to Off/90/180/270. •• Setting External Input
  • LG 43UL3G-B | User Guide - Page 47
    . •• HDMI input port 1, 2 is best suited for high definition videos that are 4K@60 Hz (4:4:4, 4:2:2). However, video or audio may not be supported depending on the specifications of the external device. If this is the case, please connect the device to a different HDMI port. •• This feature may not
  • LG 43UL3G-B | User Guide - Page 48
    . NOTE •• The [Tiling Type] and [Detail Settings] menu items are not available for models that do not support the tile mode. •• The [Screen Protection Mode] function is supported for external input images. -- The [Screen Protection Mode] function is not enabled for playing images in USB devices
  • LG 43UL3G-B | User Guide - Page 49
    needs time to recognize the pattern of the content. (The time may vary depending on the duration of the content.) •• The [Screen Shift] feature is supported only for the stand-alone configuration or for use in a single DP daisy chain. That is, if [Tile Mode] is enabled, the [Screen Shift] feature
  • LG 43UL3G-B | User Guide - Page 50
    signal is entered. Even if the monitor's picture mode has been changed by the HDMI IT Contents feature, you can change the picture mode again manually. As this has a higher priority than the picture mode set by the user, the existing picture mode may be changed when the HDMI signal changes
  • LG 43UL3G-B | User Guide - Page 51
    to music. •• [Game]: Optimize sound for playing video games. [Balance] •• [Balance]: Adjust the output volume for the left speaker and the right speaker. [Equalizer] •• [Equalizer]: Manually adjust sound by using the equalizer. [Reset] •• [Reset]: Resets sound settings.
  • LG 43UL3G-B | User Guide - Page 52
    may automatically attempt to reconnect to the Signage monitor when it is turned on. •• It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode before connecting. •• Press Device Selection to view the devices that are or that can be connected and
  • LG 43UL3G-B | User Guide - Page 53
    Speaker] (0~15): Adjust the sync between video and audio coming from external speakers, such as those connected to the digital audio output port, LG audio equipment, or headphones. The larger the number is, the slower the voice output is than the default value. •• [Internal Speaker] (0~15): Adjust
  • LG 43UL3G-B | User Guide - Page 54
    ENGLISH 54 Admin [Lock Mode] [Admin] [Lock Mode] [Home Dashboard Lock] When you set the Home Dashboard Lock, you can limit the change in the settings of the Home Dashboard. [USB Lock] This feature enables you to configure the USB lock feature so that settings or content cannot be changed. [OSD Lock
  • LG 43UL3G-B | User Guide - Page 55
    ENGLISH 55 [Change Password] This feature enables you to set the password you use to enter the Installation menu. (The default password: 000000) 1 Enter your current password. 2 Enter a new 6-digit password. 3 Enter the same password again in the Confirm Password field for confirmation. [Enterprise
  • LG 43UL3G-B | User Guide - Page 56
    player feature enables you to play/manage contents of video, image, template, SuperSign and playlist in an integrated way. (The OLED models do not support the playback and management of image content and template content.) [Continuous Play] 1 Select your desired type of content from the tab on the
  • LG 43UL3G-B | User Guide - Page 57
    ENGLISH 57 [Delete] 1 Select your desired type of content from the tab on the left and click [Delete] in the upper right-hand corner of the screen. 2 Select the content you wish to delete. 3 Click [Delete] in the upper right-hand corner of the screen. 4 You can see that the content has been deleted
  • LG 43UL3G-B | User Guide - Page 58
    ENGLISH 58 [Scheduler] (Scheduler) The Content Manager app's scheduler feature enables certain content to be played at a scheduled time through a playlist or external input. [Creating a Schedule] 1 Click [New Schedule] in the upper right-hand corner of the screen. 2 Choose between [Playlist] and [
  • LG 43UL3G-B | User Guide - Page 59
    ENGLISH 59 [Delete Schedule] 1 Click [DELETE] in the upper right-hand corner of the screen. 2 Select the schedules you wish to delete. 3 Click [DELETE]. 4 Check that the schedules have been deleted. [Calendar View] 1 When you have registered schedules, click [Calendar View]. 2 You can see that the
  • LG 43UL3G-B | User Guide - Page 60
    Photo & Video Files NOTE •• Subtitles are not supported. •• The photo feature is not supported in OLED model. Supported video codecs Extension .asf, .wmv .avi Video Audio Video Audio .mp4, .m4v, .mov .3gp .3g2 .mkv Video Audio Video Audio Video Audio .ts, .trp, .tp, .
  • LG 43UL3G-B | User Guide - Page 61
    may not be recognized. •• Please connect a USB storage device with the cable offered by the device maker. •• Some USB storage devices may not be supported or operated smoothly. •• File alignment methods of the USB storage device is similar to Windows XP and filenames can include up to 100 English
  • LG 43UL3G-B | User Guide - Page 62
    feature does not work, turn the hard disk off and on again to make it work properly. •• USB storage devices (USB 2.0 or below) are also supported. However, they may not work properly in the videos list. •• A maximum of 999 folders or files can be recognized under one folder. •• When distributing
  • LG 43UL3G-B | User Guide - Page 63
    ENGLISH 63 Group Manager 2.0 This feature enables you to group together multiple monitor sets on a single network into the same group and to distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the
  • LG 43UL3G-B | User Guide - Page 64
    ENGLISH 64 [GROUP MANAGEMENT] •• Creating a New Group 1. C lick [Add New Group]. 2. E nter a group name. 3. C lick [Add Device], select the devices you wish to add to the group, and add them. 4. C lick [Done], and you will see that a new group has been created. •• Editing a Group 1. C lick the
  • LG 43UL3G-B | User Guide - Page 65
    ENGLISH 65 [Setting Data Cloning] 1 Select your desired group and click Clone. 2 Check that the data have been copied on the slave sets. [Content Distribute] 1 Select the type of content you wish to distribute (Schedules or Playlists). 2 Select the content you wish to distribute. 3 Select the group
  • LG 43UL3G-B | User Guide - Page 66
    off the background music through [THEME SOUND]. •• A total of 5 themes ([Sunny Day], [Rainy Day], [Art Gallery], [Art Photos], and [Colorful Spring]) are available, and the supported images are as follows.
  • LG 43UL3G-B | User Guide - Page 67
    a wireless connection such as WiDi or Miracast. How to Use [ScreenShare] [ScreenShare] 1 Connect according to the instructions provided by the guide that can be accessed through the CONNECTION GUIDE button in the upper right. 2 Once the connection is established, Screen Share between the user device
  • LG 43UL3G-B | User Guide - Page 68
    wired/wireless connection to the PC. To use this feature, you need to install LG Presenter PC Client ("Client") on the PC. You can use LG Presenter in the following ways. -- Connect: Enter the PIN code to connect be available on some models. Only sharing PC screen is supported and not voice sharing.
  • LG 43UL3G-B | User Guide - Page 69
    LG Presenter] On PC 1 Go to www.lge.com/LGP to download the Client. 2 Install and run the downloaded Client. 3 Enter the username you want and press the button. 4 Select either auto search or manual appears, select the one you want to connect to. Manual search -- Click "New", type the name of the
  • LG 43UL3G-B | User Guide - Page 70
    Signage device. 3 If you deny the request for hand over, the Signage device will remain connected, so you can continue to use the features of LG Presenter.
  • LG 43UL3G-B | User Guide - Page 71
    the status of the display through the Web browser. This function is available for PCs and mobile devices. Different features are supported depending on the product. Function •• [Dashboard]: Display a summary of the product's status and provides links to each page. •• [Display & sound]: Provides
  • LG 43UL3G-B | User Guide - Page 72
    ENGLISH 72 Picture ID AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with RS-232CIN RS-232C IN RS-232C IN an IR
  • LG 43UL3G-B | User Guide - Page 73
    to a PC with a USB cable (Type A to Type B) allows you to control the connected PC by touching the screen of the product. For a PC that supports USB-C, use a USB-C cable to connect this product to the PC and control the PC using the touch screen. If your product is equipped with
  • LG 43UL3G-B | User Guide - Page 74
    ENGLISH 74 SMART CALIBRATION •• This only applies to certain models. How to Run [Smart Calibration] 1 Set the Set ID of each set. 2 Select the [Picture Mode] to execute Smart Calibration. When you set [Picture mode] to [Calibration] mode, you can set [Color Temperature] among [3000 K / Optimal
  • LG 43UL3G-B | User Guide - Page 75
    ENGLISH 75 [Manual Calibration] You can manually adjust the color of the selected location. •• [Screen Split]: Set the manual adjustment area. •• [Calibration Position]: Select the manual adjustment location. Screen Split: 4, Calibration Position: 3 Screen Split: 9, Calibration Position: 5
  • LG 43UL3G-B | User Guide - Page 76
    ENGLISH 76 IR CODE •• All models do not support the HDMI/USB function. •• Some key codes may not be supported depending on the model. Code (Hex) 08 C4 C5 95 0B 10 11 12 13 14 15 16 17 18 19 02 03 E0 E1
  • LG 43UL3G-B | User Guide - Page 77
    Code (Hex) 43 99 40 41 06 07 44 28 7B 5B 72 71 63 61 5F 3F 7C 97 96 Function (Settings/Menu) Auto Configuration (Up) (Down) (Right) (Left) (OK) (BACK) Tile Exit Picture ID On (red) Picture ID Off (green) Yellow Blue W.Bal (S.Menu) (Home) Swap Mirror 77 Remarks Remote control button Remote control
  • LG 43UL3G-B | User Guide - Page 78
    ENGLISH 78 CONTROLLING MULTIPLE PRODUCTS •• This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being
  • LG 43UL3G-B | User Guide - Page 79
    ENGLISH Communication Parameter Baud Rate: 9600 BPS Data Length: 8 bits Parity Bit: None Stop Bit: 1 bit Flow Control: None Communication Code: ASCII 79 NOTE •• When using 3-wire connections (non-standard), an IR daisy chain cannot be used. •• Be sure to only use the provided gender to connect
  • LG 43UL3G-B | User Guide - Page 80
    ENGLISH 80 Command Reference List 01 [Power] 02 Select Input 03 [Aspect Ratio] 04 [Brightness Control] 05 [Picture Mode] 06 [Contrast] 07 [Brightness] 08 [Sharpness] 09 [Color] 10 [Tint] 11 [Color Temperature] 12 [Balance] 13 [Sound Mode] 14 [Mute on] 15 Volume Control [Current Time] 1 (year/
  • LG 43UL3G-B | User Guide - Page 81
    81 ENGLISH 25 Check product serial number 26 [Software Version] 27 [White Balance] Red Gain 28 [White Balance] Green Gain 29 [White Balance] Blue Gain 30 [White Balance] Red Offset 31 [White Balance] Green Offset 32 [White Balance] Blue Offset 33 [Backlight] 34 [Screen Off] 35 [Tile Mode] 36 Check
  • LG 43UL3G-B | User Guide - Page 82
    82 ENGLISH 50 [Network Setting] 51 [Power On Status] 52 Wired [Wake On LAN] / [Wake On LAN (Networked Standby Mode)] 53 [Screen Rotation] 54 [Time Sync] 55 [Contents Sync] 56 [LAN Daisy Chain] 57 [External Input Rotation] 58 [Beacon] 59 [Brightness Scheduling] Mode 60 [Brightness
  • LG 43UL3G-B | User Guide - Page 83
    83 ENGLISH 73 [Wi-Fi Lock] 74 [Screen Share Lock] 75 [Backup via Storage] 76 [Digital Audio Input] 77 [Booting Logo Image] 78 [SoftAP] 79 [Natural Size] 80 Play Saved Internal Media 81 [No Signal Image] 82 [Audio Out] [DPM Wake Up Control] / 83 [DPM (Standby Mode) Wake Up Control] 84 Check [Fan]
  • LG 43UL3G-B | User Guide - Page 84
    c6 s n, c3 s n, a7 s n, ab s n, d6 s n, c7 j u f q f r f s t i * Note Commands may not work when there is no external input used. * Some commands may not be supported on some models. 00 to 01 Data (Hexadecimal) 00 to 01 FF 00 to 01 00 to 02 See [HDR Picture Mode] 00 to 01
  • LG 43UL3G-B | User Guide - Page 85
    mode via RS-232C, you can check the value currently set for the relevant feature (not applicable to some features). * Some commands may not be supported on some models.
  • LG 43UL3G-B | User Guide - Page 86
    from SuperSign W, WebOS Player returns NG. * If it says "Read" from the IDB mode, it will respond as a PC Label type. * SI App only supports Set operation through RS232C. 03. [Aspect Ratio] (Command: k c) Adjusts the aspect ratio of your monitor. Transmission (k)(c)( )(Set ID)( )(Data)(Cr) Data 02
  • LG 43UL3G-B | User Guide - Page 87
    ENGLISH 87 05. [Picture Mode] (Command: d x) Selects a picture mode. Transmission (d)(x)( )(Set ID)( )(Data)(Cr) Data 00: [Mall/QSR] 01: [General] 02: [Gov./Corp.] 03: [Transportation] 04: [Education] 05: [Expert1] 08: [Auto Power Save] 11: [Calibration] 12: [Hospital] Acknowledgment (x)(
  • LG 43UL3G-B | User Guide - Page 88
    ENGLISH 88 10. [Tint] (Command: k j) Adjusts the screen tints. Transmission (k)(j)( )(Set ID)( )(Data)(Cr) Data 00-64: Tint Red 50-Green 50 Acknowledgment (j)( )(Set ID)( )(OK/NG)(Data)(x) 11. [Color Temperature] (Command: x u) Adjusts the screen color temperature. Transmission (x)(u)( )(Set ID)(
  • LG 43UL3G-B | User Guide - Page 89
    product's release year. * Enter "fa [Set ID] ff" to view Clock 1 (year/month/day) settings. 2. When Setting Auto Time Data1 00: [Auto] 01: [Manual] * To view the set value of the Auto time, enter "fa [Set ID] 00 ff". Acknowledgment 1. (a)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x) 2. (a)( )(Set
  • LG 43UL3G-B | User Guide - Page 90
    Data)(Cr) Data IR_KEY_CODE Acknowledgment (c)( )(Set ID)( )(OK/NG)(Data)(x) * For key codes, see IR Codes. * Some key codes may not be supported depending on the model. 26. [Software Version] (Command: f z) Checks the software version of the product. Transmission (f)(z)( )(Set ID)( )(Data)(Cr) Data
  • LG 43UL3G-B | User Guide - Page 91
    ENGLISH 27. [White Balance] Red Gain (Command: j m) Adjusts the red gain value for white balance. Transmission (j)(m)( )(Set ID)( )(Data)(Cr) Data 00-FE: R ed Gain 0-254 FF: C hecks red gain value Acknowledgment (m)( )(Set ID)( )(OK/NG)(Data)(x) 91 30. [White Balance] Red Offset (Command: s x)
  • LG 43UL3G-B | User Guide - Page 92
    92 ENGLISH 33. [Backlight] (Command: m g) Adjusts the backlight brightness. Transmission (m)(g)( )(Set ID)( )(Data)(Cr) Data 00-64: Backlight 0-100 Acknowledgment (g)( )(set ID)()(OK/NG)(Data)(x) 34. [SCREEN OFF] (Command: k d) Turns off/off the screen. Transmission (k)(d)( )(Set ID)( )(Data)(Cr)
  • LG 43UL3G-B | User Guide - Page 93
    signals may not be available for all models. * The data number (N) may vary depending on the model. (The data number depends on the number of supported input signals.) * This feature operates as the last input, and
  • LG 43UL3G-B | User Guide - Page 94
    ) Data 1 00: Screen Fault Detection result NG 07: Screen Fault Detection result OK * When screen Fault Detection is set to Off or not supported, execution results are rendered "NG." Data 16(for checking the humidity value) Data 1 0~100: Reads the %RH value of the current humidity (indicated
  • LG 43UL3G-B | User Guide - Page 95
    ] 90: [User Image] 91: [User Video] Acknowledgment (p)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. * "02: [Orbiter]" is not supported while "91: [User Video]" is turned on.
  • LG 43UL3G-B | User Guide - Page 96
    ff 4. DNS setting: sn 01 81 156147035018 (DNS: 156.147.35.18) 5. Applying the settings: sn 01 82 80 (applies the saved IP mode (auto/manual), subnet mask, and gateway), sn 01 82 81 (applies the saved DSN) * Each IP address contains 12 decimal digits. Acknowledgment (n)( )(Set ID)( )(OK/NG)(Data1
  • LG 43UL3G-B | User Guide - Page 97
    ENGLISH 54. [Time Sync] (Command: s n, 16) Sets Time Sync. Transmission (s)(n)( )(Set ID)( )(1)(6)( )(Data)(Cr) Data 00: [Off] 01: [On] * This feature only works when the monitor is in Master mode. * This feature does not work if the current time is not set. Acknowledgment (n)( )(Set ID)( )(OK/NG
  • LG 43UL3G-B | User Guide - Page 98
    )( )(Data1)(Data2)(Data3) (Data4)(Data5)(x) * This feature may not be available for all models. * Only the input modes supported by the model works. * This feature operates as the last input, and supports data in DTV format. * When the Read operation is performed, 00 is returned if it is not for an
  • LG 43UL3G-B | User Guide - Page 99
    ENGLISH 62. [Aspect Ratio] (Multi screen) (Command: x d) Controls the aspect ratio of Multi Screen. Transmission (x)(d)( )(Set ID)( )(Data1)( )(Data2)(Cr) Data1 01: C ontrols the Main input 02: C ontrols the Sub1 input 03: C ontrols the Sub2 input 04: C ontrols the Sub3 input Data2 00: F ull
  • LG 43UL3G-B | User Guide - Page 100
    ENGLISH 100 69. [Holiday Setting] (Command: s n, 9b) Sets holidays. Transmission 1. (s)(n)( )(Set ID)( )(9)(b)( ) (Data1)( )(Data2)( )(Data3)( ) (Data4)( )(Data5)( )(Data6)(Cr) 2. (s)(n)( )(Set ID)( )(9)(b)( )(Data1)( )(Data2)(Cr) 3. (s)(n)( )(Set ID)( )(9)(b)( )(Data1)(Cr) 1. Setting a Holiday
  • LG 43UL3G-B | User Guide - Page 101
    ENGLISH 70. [UPnP] (Command: s n, 9c) Sets UPnP.mode. Transmission (s)(n)( )(Set ID)( )(9)(c)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(9)(c)(Data)(x) * This feature may not be available for all models. * Changing UPnP mode results in a reboot. 101 73. [Wi-Fi
  • LG 43UL3G-B | User Guide - Page 102
    Backup via Storage to Auto Data1 01: Auto Data2 01: 30 minute 02: 1 hour 03: 2 hours 04: 3 hours 3. Setting Backup via Storage to Manual Data1 02: Manual 4. Setting Backup via Storage to SuperSign Content Data1 03: SuperSign Contents 5. Set to SI App / Play via URL Data 1 04: [SI App / Play
  • LG 43UL3G-B | User Guide - Page 103
    ENGLISH 79. [Natural Size] (Command: s n, a5) Sets the Natural Size feature. Transmission (s)(n)( )(Set ID)( )(a)(5)( )(Data)(Cr) Data 00-64: Natural Size 0 - 100 Acknowledgment (n)( )(Set ID)( )(OK/NG)(a)(5)(Data)(x) * This feature may not be available for all models. 103 82. [Audio Out] (
  • LG 43UL3G-B | User Guide - Page 104
    ENGLISH 104 85. [Apply to all inputs] (Command: s n, 52) Apply the video mode and low value of the current input to the same video value of all inputs. Transmission (s)(n)( )(Set ID)( )(5)(2)( )(Data)(Cr) Data 01: Apply Acknowledgment (n)( )(Set ID)( )(OK/NG)(5)(2)(Data)(x) * This feature may not
  • LG 43UL3G-B | User Guide - Page 105
    87. [Time to OFF] Scheduling (Command: f e) Sets Off Timer settings. Transmission (f)(e)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) Data1 1. f1h to f7h (data reading) F1: Reads the 1st Timer Power Off's data F2: Reads the 2nd Timer Power Off's data F3: Reads the 3rd Timer Power Off's data F4: 
  • LG 43UL3G-B | User Guide - Page 106
    ENGLISH 106 91. Change Setid (Command: j x) Changes and checks Setid. 1. When it is a general LED model Transmission (j)(x)( )(Set ID)( )(Data1)( )(Data2)(Cr) Data1 Data2 : 00 01 ~ 03 e8 (1~1000) Acknowledgment (x)( )(Set ID)( )(OK/NG)(Data1)(Data2)(x) 2. When it is another model (read only)
  • LG 43UL3G-B | User Guide - Page 107
    96. [Input Manager] (Command: s n, b1) It sets labels by input. Transmission (s)(n)( )(Set ID)( )(b)(1)( )(Data1)( )(Data2)(Cr) Data1 90: HDMI1 91: HDMI2 92: OPS/HDMI3/DVI-D 95: OPS/DVI-D 96: HDMI3/DVI-D 97: HDMI3/HDMI2/DVI-D 98: OPS 99: HDMI2/OPS C0: DISPLAYPORT C1: DISPLAYPORT/USB-C C2: HDMI3 C3:
  • LG 43UL3G-B | User Guide - Page 108
    )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(5)(Data)(x) * Depending on the model, some picture modes may not be supported. * It works only when the HDR content is running. 107. [LED Local Dimming] (Command: s n, c6) Sets the LED Local Dimming. (A feature to set
  • LG 43UL3G-B | User Guide - Page 109
    1 00~64: Range control Acknowledgement (n)( )(Set ID)( )(OK/NG)(a)(b)(Data1)(Data2)(x) * This feature may not be available for all models. * Data2 only supports Hex values that are multiples of 5. * The range of minimum brightness value cannot exceed the range of maximum brightness, and the range of
  • LG 43UL3G-B | User Guide - Page 110
    ID)( )(Data)(Cr) Data 00~64: Min -50 (Reduce) ~ Max 50 (Enlarge) Acknowledgement (s)( )(Set ID)( )(OK/NG)(Data)(x) * It may not be supported depending on the model. 114. Horizontal location (Command: f q) Adjust the screen horizontal location. (Only be executed in RGB-PC input mode.) * However, the
  • LG 43UL3G-B | User Guide - Page 111
    111 ENGLISH TROUBLESHOOTING »»Each model may have different points to check. »»For PC(graphics card) has been installed. -- Check if the plug and play function is supported by the PC(graphics card) user manual. Issues Related to Screen (Video) •• A message saying 'No signal' or 'Invalid Format
  • LG 43UL3G-B | User Guide - Page 112
    correctly because the atypical aspect ratio is not supported before the graphics card driver is configured. This is not a problem of the product; it is due to mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu. •• The image is not displayed. --
  • LG 43UL3G-B | User Guide - Page 113
    ENGLISH 113 Issues Related to Screen (Color) •• Screen has poor color resolution (16 colors). -- Use PC settings to set the color to 24 bits (True Color) or above. •• Screen color is unstable or mono-colored. -- Check the connection status of the signal cable. Or, re-insert the PC graphics card. ••
  • LG 43UL3G-B | User Guide - Page 114
    ENGLISH 114 Other Issues •• The power suddenly turned off. -- Check if the auto-off function is activated on the settings related time. -- Power source has not being supplied properly. See if the product power cord is connected properly. -- Check the power control settings. -- If the internal
  • LG 43UL3G-B | User Guide - Page 115
    . Change your tablet PC settings. •• Multi-touch does not respond. -- The content played (e.g. Paint, etc.) may not support Multi-touch points. Make sure that you use a content that supports Multi-touch point. -- Remove the USB cable and connect it again in 10 seconds. -- Run the content (e.g. Paint
  • LG 43UL3G-B | User Guide - Page 116
    changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once
  • LG 43UL3G-B | User Guide - Page 117
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
Please read this manual carefully before operation and retain it for future
reference.
webOS 4.1
www.lg.com
USER MANUAL
LG Digital
Signage
(MONITOR SIGNAGE)