LG 43UL3G-B User Guide - Page 92
Natural Mode] In Tile Mode Command: d j, Tile Mode] Check Command: d z
View all LG 43UL3G-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
92 ENGLISH 33. [Backlight] (Command: m g) Adjusts the backlight brightness. Transmission (m)(g)( )(Set ID)( )(Data)(Cr) Data 00-64: Backlight 0-100 Acknowledgment (g)( )(set ID)()(OK/NG)(Data)(x) 34. [SCREEN OFF] (Command: k d) Turns off/off the screen. Transmission (k)(d)( )(Set ID)( )(Data)(Cr) Data 00: Screen On 01: Screen Off Acknowledgment (d)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 35. [Tile Mode] (Command: d d) Sets a tile mode and values for the tile rows and columns. Transmission (d)(d)( )(Set ID)( )(Data)(Cr) Data 00-FF: The first byte - tile column The second byte - tile row * 00, 01, 10, and 11 mean that the tile mode is off. * The maximum value may differ depending on the model. Acknowledgment (d)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. * If you change the values on a Video Wall model, please reboot for it to work normally. 36. [Tile Mode] Check (Command: d z) Checks the tile mode. Transmission (d)(z)( )(Set ID)( )(Data)(Cr) Data FF: Check Tile Mode Acknowledgment (z)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x) Data1 00: Tile Mode off 01: Tile Mode on Data2 00-0F: Tile column Data3 00-0F: Tile row * This feature may not be available for all models. 37. [Tile ID] (Command: d i) Sets the tile ID value of the product. Transmission (d)(i)( )(Set ID)( )(Data)(Cr) Data 01-E1: Tile ID 1-225 FF: Checks the Tile ID * The data value cannot exceed the value of row x column. Acknowledgment (i)( )(Set ID)( )(OK/NG)(Data)(x) * If you enter a value that exceeds the value of row x column for the Data parameter (except for 0xFF), Ack becomes NG. * This feature may not be available for all models. * If you change the values on a Video Wall model, please reboot for it to work normally. 38. [Natural Mode] (In Tile Mode) (Command: d j) To display the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted. Transmission (d)(j)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (j)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models.