LG 43UL3G-B User Guide - Page 49
Energy Saving], Off]: Disable the Smart Energy Saving feature.
View all LG 43UL3G-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
ENGLISH 49 we recommend using a router or network switch. •• If [Screen Protection Mode Settings] is all set and in operation, and the settings are changed or the [Screen Protection Mode] function is discontinued, the function restarts next time the product is turned on. -- To enable the [Screen Protection Mode] function, it needs time to recognize the pattern of the content. (The time may vary depending on the duration of the content.) •• The [Screen Shift] feature is supported only for the stand-alone configuration or for use in a single DP daisy chain. That is, if [Tile Mode] is enabled, the [Screen Shift] feature only works properly when the values of [Row] and [Column] in [Tile Mode Setting] are the same as those of [Row] and [Column] in [Detail Settings]. •• When [Content Luminance Compensation] is set to [High], there may be differences in brightness than when it is set to [Low]. •• Return to default settings by clicking [Admin] > [Factory Reset]. •• When using the Screen Shift function, the location of the touched and operated area may be slightly different. [Energy Saving] •• [Smart Energy Saving]: Automatically adjust the brightness of the screen according to the brightness of the picture to save energy. -- [On]: Enable the Smart Energy Saving feature. -- [Off]: Disable the Smart Energy Saving feature. •• [Brightness Control]: Adjust the brightness of the screen to save energy. -- [Auto:] Automatically adjust the brightness of the screen according to ambient light. -- [Off]: Disable energy saving. -- Minimum/Medium/Maximum: Use energy saving according to the energy saving level set for the monitor. •• [Brightness Range Adjustment]: Sets the min/max values of the brightness range for the backlights adjusted by the illumination sensors. -- [Min Backlight]: Sets the min value of the backlights. -- [Max Backlight]: Sets the max value of the backlights. •• [Brightness Scheduling]: Adjust the backlight at specified times. -- You can set this feature to [On/Off]. -- Add schedule by setting the schedule time and backlight/OLED Light/LED Light value. -- If the current time has not been set, [Brightness Scheduling] is disabled. -- You can add up to six schedules, and they are sorted in ascending order by time. -- You can edit a schedule by selecting it from the list and pressing the [OK] button. NOTE •• Return to default settings by clicking [Admin] > [Factory Reset].