LG A939KBGS Owners Manual - Page 57

Status Display OPERATION 17 ENGLISH "650 List Dust Emptying (Replace Bag) Indicator a Auxiliary Battery Indicator b Auto Emptying Indicator c Descriptions • Indicates the dust emptying operation status or when to replace the dust bag. - White: Product is emptying dust. - Flashing red: If the indicator flashes red while emptying dust, replace the dust bag at the end of the dust emptying operation. - Flashing red, beeping: If the dust emptying operation is complete and the dust bag is full, the indicator will flash red, beep 10 times and then turn off. - If the indicator flashes red, replace the dust bag to maintain product performance. • Indicates the charging status of the auxiliary battery. - Flashes: When the auxiliary battery is mounted in the charger. - Lights up briefly and then turns off: Auxiliary battery charging is complete. - The auxiliary battery will not charge until the battery mounted in the vacuum cleaner is fully charged. Check the battery level on the handle of the vacuum cleaner to check whether charging is complete. • Lights to indicate that the automatic dust emptying mode is on. - Automatic dust emptying mode automatically starts to operate every time the vacuum cleaner is mounted correctly onto the product. - If you remove the vacuum cleaner and mount it immediately, dust emptying operation may not start automatically, depending on the circumstance. If it doesn't start automatically, select the Start/Stop button to start. NOTE • Remove all the protective plastic from the vacuum cleaner before use. Otherwise, it may cause abnormal noise during the dust emptying operation. Emptying the Vacuum's Dust Bin Using the Auto Mode When the automatic dust emptying mode is set, the dust emptying operation starts automatically whenever the vacuum cleaner is properly inserted into the product. When you purchase the product, the automatic dust emptying mode is set by default. 1 Insert the vacuum cleaner into the product. • After adjusting the length adjustment pipe of the vacuum cleaner to the shortest length, attach it to the product. • If the vacuum cleaner pipe is connected to a combination tool or a crevice tool, the vacuum cleaner doesn't fit inside the product. Use it without the combination tool or the crevice tool. • If the vacuum cleaner fits properly inside the product, the alarm will sound. If the alarm does not sound, reinsert the vacuum