LG A939KBGS Owners Manual - Page 58

18 OPERATION cleaner, making sure that the nozzle sits flat on the floor. • Before starting the dust emptying operation, pull the easy dust emptying lever on the vacuum cleaner down 2 or 3 times to sweep away the dust to make the operation easier. 2 When the dust emptying operation is complete, a melody sounds, the dust emptying (replace bag) icon turns off, and the vacuum cleaner starts charging. Using the Manual Mode 1 Press Select Mode to change from the Auto mode to the Manual mode. 2 Insert the vacuum cleaner into the product. 3 Press the Start/Stop button. The dust emptying (replace bag) icon flashes white, and the dust emptying operation begins along with a melody. Do not try to remove the vacuum once the operation starts. 4 When the dust emptying operation is complete, a melody sounds, the dust emptying (replace bag) icon turns off, and the vacuum cleaner starts charging. WARNING • Do not wash the vacuum cleaner body or the inlet with water. If water enters the built-in motor, it can cause electric shock or fire. CAUTION • Do not forcibly remove the vacuum cleaner during the dust emptying operation or when it is paused. Since the vacuum cleaner is mounted, the product may break or fall, causing injury or product damage. - Remove the vacuum cleaner after the dust emptying (replace bag) icon in the status display is turned off completely. • Do not put foreign objects such as hands, garbage, or toys in the dust suction area of the product without a vacuum cleaner mounted. • Do not push, pull, or lean on the product; it may fall, causing injury or damage. • Do not put objects like smartphones on the product's control panel. The product may malfunction due to vibration, or the object may fall to the floor, causing injury or damage. • If the power suddenly turns off during the dust emptying operation, the vacuum cleaner is mounted and cannot be removed. Causes for power loss include a power outage, a turned off power strip, an unplugged power cord, and a tripped circuit breaker. • After the power comes back on, remove the vacuum cleaner when the settings on the vacuum cleaner mounting unit are reset. NOTE • The sound of the high-performance motor may be louder than the existing wireless vacuum cleaner. It is normal to hear sounds such as the vacuum cleaner, dust bin cover opening, product operating unit, and suction. • The vacuum cleaner mounting unit of the charging station is cleaned with a stronger suction force just before the dust emptying operation is over. The sound may increase, but this is normal and not a fault. • During the dust emptying operation, the product and auxiliary battery are not charged for safety reasons. • Replace the dust bag every month to maintain the dust emptying performance. The replacement cycle may vary depending on the environment, and may be especially short in conditions with a lot of dust or pet hair. • The dust bin may not be emptied completely under certain conditions (very full, contains long hairs, etc.). If this happens, press Start/Stop to repeat the emptying process. • Clean the dust bin's inside, the easy dust emptying lever and the large dust separator to remove remaining dust. For more information, see the vacuum cleaner owner's manual. • The UV function in the dust bag enclosure automatically starts when the vacuum cleaner is inserted into the product. It runs for 2 hours or