LG DLEX3550W Owner's Manual - Page 36

Custom program, Steam functions

Get LG DLEX3550W PDF manuals and user guides View all LG DLEX3550W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

36 how to use Custom program If you have a special combination of settings that you use frequently, you can save these settings as a CUSTOM PROGRAM. * To Save a Custom Program: 1. Turn on the dryer and turn the cycle selector knob to select the desired cycle. 2. Use the cycle setting buttons to adjust the settings for that cycle. 3. Press the cycle option button(s) for the option you would like to add. A confirmation message will be shown in the display. 4. Press and hold the CUSTOM PROGRAM button for 3 seconds. NOTE You may save only one custom program at a time. Pressing and holding the CUSTOM PROGRAM button will overwrite any previously saved custom program. To Recall a Custom Program: 1. Turn on the dryer. 2. Press the CUSTOM PROGRAM button. 3. Press the START/PAUSE button to start the cycle. Steam functions To Fill the Steam Feeder 1. Pull out the drawer. Drawer 2. Lift out the steam feeder. 3. Fill the steam feeder just to the filter screen. Steam Feeder Water ONLY 4. P lace the steam feeder in the drawer; then push in the drawer until it clicks into place. NOTE Before using a Steam Cycle, the steam feeder must be filled with water up to the MAX line. If not, the will be displayed. Make sure that the steam feeder is filled with water or the drawer is fully closed. Turn the dryer off then restart the Steam Cycle. • Only use water. Do not fill the steam feeder with foreign substances, rinse agents, or detergents. • Before moving the dryer, make sure the steam feeder is empty. • Do not use distilled water; the water level sensor in the steam generator will not work. • Be careful to put the Steam Feeder otherwise water will be overflow. • Wipe up any spilled water around the Steam Feeder and the drawer before starting the dryer. • Do not fill the steam feeder with hot water (over 86°F/30°C). wWarning • D o not fill the steam feeder with liquids such as gasoline, dry-cleaning solvents, or other flammable or explosive substances. Failure to follow this warning can cause serious injury or death. • D o not drink water from the steam feeder. Failure to follow this warning can cause serious injury or death.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
36
HOW TO USE
Custom program
If you have a special combination of settings that you use
frequently, you can save these settings as a CUSTOM PROGRAM.
* To Save a Custom Program:
1. Turn on the dryer and turn the cycle selector knob to select the
desired cycle.
2. Use the cycle setting buttons to adjust the settings for that
cycle.
3. Press the cycle option button(s) for the option you would like to
add. A confirmation message will be shown in the display.
4. Press and hold the CUSTOM PROGRAM button for 3 seconds.
You may save only one custom
program at a time. Pressing
and holding the CUSTOM PROGRAM button will overwrite any
previously saved custom program.
To Recall a Custom Program:
1. Turn on the dryer.
2. Press the CUSTOM PROGRAM button.
3. Press the START/PAUSE button to start the cycle.
Steam functions
To Fill the Steam Feeder
1. Pull out the drawer.
2. Lift out the steam feeder.
3. Fill the steam feeder just to the filter screen.
4. Place the steam feeder in the drawer; then push in the drawer
until it clicks into place.
Before using a Steam Cycle, the steam feeder must be filled with
water up to the MAX line. If not, the
will be displayed. Make
sure that the steam feeder is filled with water or the drawer is fully
closed. Turn the dryer off then restart the Steam Cycle.
• Only use water. Do not fill the steam feeder with foreign
substances, rinse agents, or detergents.
• Before moving the dryer, make sure the steam feeder is empty.
• Do not use distilled water; the water level sensor in the steam
generator will not work.
• Be careful to put the Steam Feeder otherwise water will be
overflow.
• Wipe up any spilled water around the Steam Feeder and the
drawer before starting the dryer.
• Do not fill the steam feeder with hot water (over 86°F/30°C).
w
WARNING
•
Do not fill the steam feeder with liquids such as gasoline,
dry-cleaning solvents, or other flammable or explosive
substances.
Failure to follow this warning can cause
serious
injury or death.
•
Do not drinK water from the steam feeder.
Failure to follow
this warning can cause
serious injury or death.
Drawer
Water
ONLY
Steam
Feeder
NOTE
NOTE