LG DLEX7800WE Owners Manual - Page 18
Remove the top lock rod.
View all LG DLEX7800WE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
ENGLISH 7 Lift out the gray interlock button in the side of the door. Make sure to remove the spring with the interlock button and to keep the two together. Set the interlock button aside. Do not confuse these with the interlock buttons from the top of the outer door. INSTALLATION 17 10 Remove the upper hinge pivot. Once the top lock rod has been removed, the hinge pivot can easily be removed from the hinge assembly on the upper left and set aside. Upper hinge assembly Upper hinge pivot 8 Remove the side lock rod. Remove the side lock rod from the lower hinge bracket by lifting the top end of the rod and sliding it toward the top of the door. The spring should remain attached to the lock rod. Set the lock rod aside. 9 Remove the top lock rod. Spring 11 Reverse the upper hinge assembly and hinge filler. Lift out the upper hinge filler (on the right) and set it aside. Carefully lift the upper hinge assembly (on the left) out of the outer door frame, using a small flat blade screwdriver if necessary. Rotate the hinge assembly 180 degrees and install it on the upper right side of the outer door. You will need to press firmly to install the hinge assembly. The hinge pivot removed in step 11 will be installed later. a. Slide the lock rod to the right to remove it from the hinge assembly on the left side. b. While sliding the lock rod right, lift the right end up and out of the guides. Upper hinge assembly Upper hinge pivot Now rotate the hinge filler 180 degrees and install it on the upper left side of the door. NOTE Do not remove the two inner lock rods and two interlock buttons (see page 16) located underneath the top lock rod. They do NOT need to be reversed. Upper hinge filler MFL70442605_en_190215.indd 17 2019-02-15 오후 2:38:18