LG DLGX7901WE Owners Manual - Page 16
Lift off the door cover., Switch the door strike and the blank cover., ON THE DOOR
View all LG DLGX7901WE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 INSTALLATION e. Remove the three screws on the hinge at the bottom left. Remove the hinge and reinstall it on the right side. The top screw will occupy the hole where you removed the screw behind the hinge bracket in step d. 5 Switch the door strike and the blank cover. Remove the two screws on the door cover that secure the door strike. Switch the door strike and the blank cover, installing them on the opposite sides from which they were removed. f. Install the hinge bracket removed in step d on the bottom left side, first installing one screw behind the hinge bracket. Cabinet Reversal complete hinge cover latch hole cover latch mechanism hinge bracket hinge ON THE DOOR: 4 Lift off the door cover. With the door laid inside facing up on a protected surface, remove the twelve screws on the inside of the door. Carefully lift off the door cover with the help of a small flat blade screwdriver inserted in the upper corner (circled below). WARNING The edges of the door cover may be sharp. Take care when handling, or wear gloves to avoid injury. Twelve screws Hole plug Side Interlock button Short screws Long screw Blank cover Pull Door strike Raise Remove blank cover Gently pry out the hole plug on the side of the door cover and install it in the hole on the opposite side. Hole plug Set the door cover aside.