LG DLGX7901WE Owners Manual - Page 55
press, or synthetic blends., Drying synthetics, permanent
View all LG DLGX7901WE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Troubleshooting 55 Problem Lint on clothes Possible Cause Excess static in clothes. Dryer is overloaded. Solutions Use a fabric softener to reduce static electricity. Be sure to follow the manufacturer's instructions. Overdrying a load of laundry can cause a buildup of static electricity. Adjust settings and use a shorter drying time, or use SENSOR DRY cycles. Divide extra large loads into smaller loads for drying. Tissue, paper, etc., left in pockets. Check pockets thoroughly before washing and drying clothes. Fabric softener is not used or used incorrectly. Use a fabric softener or the STATIC SHIELD option, if equipped, to reduce static electricity. Be sure to follow the manufacturer's instructions. Excess static in clothes Clothes dried too long after drying (overdried). Overdrying a load of laundry can cause a buildup of static electricity. Adjust settings and use a shorter drying time, or use AUTO DRY cycles. Select a LESS DRY setting on SENSOR DRY cycles, if necessary. Drying synthetics, permanent press, or synthetic blends. These fabrics are naturally more prone to static buildup. Try using fabric softener, or use LESS DRY and/or shorter TIME DRY time settings. Clothes have damp spots after a SENSOR DRY cycle. Very large load or very small load. Single large item such as a blanket or comforter. If items are too tightly packed or too sparse the sensor may have trouble reading the dryness level of the load. Use a Time Dry cycle for very small loads. Large, bulky items such as blankets or comforters can sometimes wrap themselves into a tight ball of fabric. The outside layers will dry and register on the sensors, while the inner core remains damp. When drying a single bulky item, it may help to pause the cycle once or twice and rearrange the item to unwrap and expose any damp areas. To dry a few remaining damp items from a very large load or a few damp spots on a large item after a sensor cycle has completed, empty the lint trap, then set a Time Dry cycle to finish drying the item(s).