LG DLGX7901WE Owners Manual - Page 19
Reinstall the top lock rod., assembly., Reverse the lower hinge bracket and hinge
View all LG DLGX7901WE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
12 Reinstall the top lock rod. Rotate the top lock rod (removed in step 10) 180 degrees end for end from its original position and reinstall it. The spring should now be to the right of center, with the spring on the side of the rod facing the top of the door. a. Insert the right end of the lock rod into the right hinge assembly. Make sure the rod is aligned with the guides in the door panel. b. Lower the rod into position, sliding it to bypass the center handle, making sure to align the lock rod with the guides all the way across the door panel. When released, the lock rod should slide completely into the hinge assembly on the right. Slide the lock rod back and forth to make sure it is correctly positioned in the guides and slides easily. INSTALLATION 19 c. Flip over the lower hinge bracket and release the tabs on the back locking the hinge filler to the hinge bracket. Tab d. Rotate the hinge 180 degrees and snap it back onto the front of the hinge bracket facing in the opposite direction. e. Mount the lower hinge bracket and the filler on the left side of the door with the screw removed in step a. Screw 13 Reverse the lower hinge bracket and hinge assembly. a. Remove the screw from the lower hinge bracket (on the right) and lift the hinge bracket out. Set it aside. Remove the two screws from the lower hinge assembly on the bottom left and lift the hinge assembly out. 14 Install the side lock rod. Flip the side lock rod over and install it on the opposite side. Insert the lower end into the left hinge and lower the rod into the guides on the door while compressing the spring inside the recess. b. Rotate the lower hinge assembly 180 degrees and install it on the right side using the two screws removed in step a. Make sure the top of the side lock rod is beside the top lock rod and the two do not overlap each other, so the two rods can interact correctly. If they are not aligned properly, the door will not operate properly. Screws Lower hinge assembly