LG DLHC1455V Owners Manual - Page 14

14 INSTALLATION Leveling the Appliance WARNING • Use long-sleeved gloves and safety glasses. • The appliance is heavy. Two or more people are required when installing the appliance. Checking the Level Position the appliance in the final location and place a level across the top of the appliance. and front to back. Make sure that all four leveling feet are in firm contact with the floor. NOTE • If you are installing the appliance on the optional pedestal, you must use the leveling feet on the pedestal to level the appliance. The appliance leveling feet should be fully retracted. a Level b Leveling Feet NOTE • All four leveling feet must rest solidly on the floor. Gently push on the top corners of the appliance to make sure that the appliance does not rock from corner to corner. • Adjust the leveling feet only as far as necessary to level the appliance. Extending the leveling feet more than necessary may cause the appliance to vibrate. • To ensure that the appliance provides optimal drying performance, it must be level. To minimize vibration, noise, and unwanted movement, the floor must be a perfectly level, solid surface. Adjusting the Leveling Feet Use an adjustable wrench to turn the leveling feet. Unscrew the legs to raise the appliance or screw in the legs to lower it. Raise or lower with the leveling feet until the appliance is level from side to side Reversing the Door WARNING • Support the door with a stool or box that fits under the door, or have an assistant support the weight of the door. • Avoid dropping the door. • Unplug the appliance or turn off power at the main circuit breaker before beginning door reversal. • Always reverse the door BEFORE stacking the appliance on top of the washer. Tools Required • Phillips screwdriver • Large flat blade screwdriver (recommended for hinge screws if they are tight or your Phillips screwdriver is worn) • Small flat blade screwdriver (for lifting out parts) Door Reversal Instructions The instructions here are for changing the door swing from a right to a left side hinge. If the door has been reversed, and it is necessary to change it back, use care when following these instructions. Some of the illustrations and the left/right references will be reversed, and you will need to read the instructions carefully. WARNING • Do not reverse the door while the appliance is stacked on a washing machine. • Before removing the hinge screws, have an assistant support the weight of the door. The door could fall on the floor due to the weight of the door.