LG DLHC1455V Owners Manual - Page 40

Draining the Remaining Condensed, Water, Using Drum Care Feature

Page 40 highlights

40 MAINTENANCE NOTE • Warm air is expelled through the ventilation grille. • The installation location should have adequate ventilation to avoid pulling in the air from nearby fuel-burning appliances. 3 Reassemble the plug onto the drain tube and reclip the drain tube into its holder. CAUTION • If the plug is not securely inserted into the drain tube, water will leak out and could cause damage. Draining the Remaining Condensed Water After drying clothes, a small quantity of condensed water may sit in the base of the appliance and cause odors. Drain the remaining water regularly to reduce any unpleasant odors from the appliance. NOTE • It's better to drain the remaining water when you are going to be away for a long time, because the remaining water will stagnate and cause odors. • For best results, drain the remaining water before running Drum Care. • The remaining water can freeze inside the main drain hose(s) and affect the drying performance in cold weather. Draining the remaining water can prevent damage to the appliance from unexpected freezing. 1 Run the Air Dry cycle for 3 minutes, and then turn off the appliance. 2 Unclip the drain tube under the appliance, remove the plug and drain the remaining water. Using Drum Care Feature Run the Drum Care cycle periodically to prevent unpleasant odors in the drum. CAUTION • Remove all of the clothes from the appliance. 1 Remove the water container, empty it, and reassemble it. 2 Turn on the appliance. 3 Press the Drum Care button for 3 seconds. NOTE • Use the water collection tank if the optional drain hose is installed or the appliance is stacked on a washing machine. 4 Press the Start/Pause button. • This function operates for about 3 hours. 5 Empty the water container after the function has finished. NOTE • If the optional drain hose is installed, there is no need to empty the water container.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

40
MAINTENANCE
NOTE
Warm air is expelled through the ventilation
grille.
The installation location should have adequate
ventilation to avoid pulling in the air from nearby
fuel-burning appliances.
Draining the Remaining Condensed
Water
After drying clothes, a small quantity of condensed
water may sit in the base of the appliance and
cause odors. Drain the remaining water regularly
to reduce any unpleasant odors from the
appliance.
NOTE
It's better to drain the remaining water when
you are going to be away for a long time,
because the remaining water will stagnate and
cause odors.
For best results, drain the remaining water
before running
Drum Care
.
The remaining water can freeze inside the main
drain hose(s) and affect the drying performance
in cold weather. Draining the remaining water
can prevent damage to the appliance from
unexpected freezing.
1
Run the
Air Dry
cycle for 3 minutes, and then
turn off the appliance.
2
Unclip the drain tube under the appliance,
remove the plug and drain the remaining
water.
NOTE
Use the water collection tank if the optional
drain hose is installed or the appliance is stacked
on a washing machine.
3
Reassemble the plug onto the drain tube and
reclip the drain tube into its holder.
CAUTION
If the plug is not securely inserted into the drain
tube, water will leak out and could cause
damage.
Using Drum Care Feature
Run the
Drum Care
cycle periodically to prevent
unpleasant odors in the drum.
CAUTION
Remove all of the clothes from the appliance.
1
Remove the water container, empty it, and
reassemble it.
2
Turn on the appliance.
3
Press the
Drum Care
button for 3 seconds.
4
Press the
Start/Pause
button.
This function operates for about 3 hours.
5
Empty the water container after the function
has finished.
NOTE
If the optional drain hose is installed, there is no
need to empty the water container.