LG DU-27FB32C Installation Guide - Page 44
Detailed Descriptions of Installer, Menu Items - tv key lock
View all LG DU-27FB32C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Installer Menu Installer Menu Items 89-I through 103-I Menu Function Item 89-I. POKE ENABLE Value Range 0 / 1 90-I. KEY LOCK 91-I. NOT USED 92-I. NOT USED 93-I. NOT USED 94-I. NOT USED 95-I. AUDIO MD DISP 0 / 1 0 / 1 96-I. NOT USED 97-I. NOT USED 98-I. NOT USED 99-I. NOT USED 100-I. ATSC TUNE MD 0 / 1 101-I. STRT MINOR CH 0 ~ 255 102-I. NOT USED 103-I. A RATIO LOCK 0 / 1 Default Value 0 0 Brief Description of Function and Comments When set to 1, writing to Non - volatile memory through M.P.I. is enabled. When set to 1, front keyboard functionality is disabled. 1 When set to 1, Audio Mode Information is enabled to appear in the Channel Time Display. 0 Sets ATSC tuning mode. Set to 0 for virtual channel, set to 1 for physical channel. 0 Sets the starting minor channel. For NTSC set to 0. If not 0, sets minor channel number. Set to 255 to show last tuned channel at turn on. 0 Set to 1, to retain current aspect ratio at turn off. At turn on, last set aspect ratio will be used. Set to 0 to reset picture aspect ratio to default at TV turn on. Detailed Descriptions of Installer Menu Items 0-I. INSTALLER SEQUENCE Gives access to Installer Menu depending on the code selected. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 1-I. POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The POWER MANAGE function is for saving energy. When set to 0, Power Manage is OFF. Settings range from 0 - 7, with 1 - 7 representing the hours that the TV will remain on, unless there has been activity from either the control panel or remote control. *M.P.I. Multiple Protocol Input: LG protocol for remote control of TV through RJ11 (M.P.I.) jack on TV connections panel. 2-I. AC ON (AC Power Switchable) Allows the TV to turn ON just by applying AC power. Pressing the ON button is not necessary. This is desirable when the TV is plugged into a cable box or a power outlet controlled by a wall switch. Use ADJ to select 0 or 1, where 0 is the default is OFF, and 1 is ON. NOTE: When set to 1 (ON), the TV does not respond to ON/OFF commands from either the remote or the control panel, and the SLEEP TIMER is also not functional. 3-I. BAND/AFC (Band/Automatic Frequency Control) There are 8 possible settings for this option: 0 = Broadcast Fixed 4 = Broadcast AFC 5 = CATV Fixed 1 = CATV AFC 6 = HRC Fixed 2 = HRC AFC 7 = ICC Fixed 3 = ICC AFC Channels are accessed faster when fixed modes are used. The AFC (search modes) should only be used when some channels are not on nominal frequencies. NOTE: BAND is automatically set by AUTO Page 44