LG DU-27FB32C Installation Guide - Page 49
Detailed Descriptions for Installer Menu Items 76-I through 103-I
View all LG DU-27FB32C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Installer Menu Detailed Descriptions for Installer Menu Items 76-I through 103-I 76-I. DEFEAT XDS Set to 1 to disable XDS display. Set to 0 to enable XDS display. XDS data (provided at the discretion of the broadcaster), is available only on analog channels. After a channel change, wait 5 seconds then press ENTER to see XDS data, if available. 77-I. NOT USED 78-I. UPN MSB User programmable number, most significant byte readable by M.P.I. command. 79-I. UPN MSB-1 User programmable number, most significant byte-1 readable by M.P.I. Command. 80-I. UPN MSB-2 User programmable number, most significant byte-2 readable by M.P.I. command. 81-I. UPN LSB User programmable number, least significant byte readable by M.P.I. command. 82-I. CHKSM ERROR Enforces rigid M.P.I checksum validation. Set to 1 for validation. Set to 0 to turn off. 83-I. HANDSHK TIME Adds an additional delay to the handshake time which is 64 msec, thus relaxing M.P.I. timing requirements to be compatible with PC based Windows controlled systems, range is 0 - 5. Set to 0 to retain standard 64 msec delay. Set to 1 - 5 to increase @ 16 msec ea., the delay up to 144 msec. 84-I. PERMANENT BLK Allows Parental Control blocking schemes to be permanent by removing the blocking hours function. Set to 1 to install Parental Control blocking restrictions permanently. Set to 0 for user-specified hours control of blocking schemes. 85-I. A MUTE TIME Controls audio muting delay time when switching between AUX sources. Range is 0 to 254 msec. 86-I. V MUTE TIME Controls video muting delay time when switching between AUX sources. Range is 0 to 254 msec. 87-I. NOT USED 88-I. EN NOISE MUTE When set to 1, the audio signal volume is limited to a minimum value while receiving no signal from the broadcaster. 89-I. POKE ENABLE When set to 1, writing to Non-volatile Memory thru M.P.I. Is enabled. 90-I. KEY LOCK When set to 1, front keyboard functionality is disabled. When set to 0, keyboard is enabled. 91-I. NOT USED 92-I. NOT USED 93-I. NOT USED 94-I. NOT USED 95-I. AUDIO MD DISP When set to 1, Audio Mode Information is enabled to appear as part of the Channel-Time Display. 96-I. NOT USED 97-I. NOT USED 98-I. NOT USED 99-I. NOT USED 100-I. ATSC TUNE MD (ATSC Tuning Mode) Sets ATSC tuning mode. Set to 0 for virtual channel, set to 1 for physical channel. 101-I. STRT MINOR CH (Start Minor Channel) Sets the starting minor digital channel number. For NTSC set at 0. Not 0, sets digital minor start channel number. Used with item 4-I Start Channel. Set the major channel number in 4-1 and the minor digital dash number in item 101-I. At TV turn on, start channel number is automatically tuned in. Set to 0 if item 4-I is set to 255 for last tuned channel. 102-I. NOT USED 103-I. A RATIO LOCK (Aspect Ratio Lock) When set to 1, current picture aspect ratio is retained at power off. At power on, previous aspect ratio will be used. If set to 0, resets aspect ratio to default setting at TV turn on. Page 49