LG HBLG2350E Service Manual - Page 7
Electrical Parts - refrigerator
View all LG HBLG2350E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2.2.4 SHROUD 1. Remove the fan. (Refer to section 2.2.3) 2. Remove the 2 screws which fasten the shroud. 3. Remove the shroud. (See Fig. 8) 4. Re-install the component by referring to the removal procedure, above. 2.3 ELECTRICAL PARTS 2.3.1 MOTOR 1. Remove the cabinet. (Refer to section 2.1.2) 2. Remove the cover control and disconnect a wire housing in control box. (Refer to section 2.1.3) 3. Remove the blower. (Refer to section 2.2.2) 4. Remove the fan. (Refer to section 2.2.3) 5. Remove the 4 screws which fasten the motor. (See Fig. 9) 6. Remove the motor. 7. Re-install the components by referring to the removal procedure, above. Figure 8 (a) 2.3.2 COMPRESSOR 1. Remove the cabinet. (Refer to section 2.1.2) 2. Discharge the refrigerant by using a Refrigerant Recovery System. 3. Disconnect the 3 leads from the compressor. 4. After purging the unit completely, unbraze the suction and discharge tubes at the compressor connections. 5. Remove the 3 nuts and the 3 washers which fasten the compressor. (See Fig. 10) 6. Remove the compressor. 7. Re-instill the components by referring to the removal procedure, above. 2.3.3 CAPACITOR 1. Remove the control box. (Refer to section 2.1.3) 2. Remove the screw which fasten the display panel. 3. Disconnect the 2 leads from the rocker switch and remove the panel. 4. Remove a screw and unfold the control box. (See Fig. 11) 5. Remove the screw and the clamp which fastens the capacitor. (See Fig. 11) 6. Disconnect all the leads of capacitor terminals. 7. Re-install the components by referring to the removal procedure, above. Figure 9 Figure 10 Figure 11 Copyright ©2007 LG Electronics. Inc. All right reserved. Only for training and service purposes -7- Figure 8 (b) LGE Internal Use Only