LG HECTO Additional Link - Installation Manual - Page 18
Ez Bracket Adjustment Guide, Reset projection, Adjust the projection to fit within the screen
View all LG HECTO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 INSTALLATION Ez Bracket Adjustment Guide 1. Reset projection * P ress the Edge Adj button on the remote control and select Reset. (Select Settings → OPTION → Edge Adj → Reset to reset the position of the projection.) OPTION ︿ • Language • Caption : Off • Pointer • Set ID : 1 • PJT Mode : Front • Edge Adj • Blank Image : Blue ? ﹀ 2. Adjust the projection to fit within the screen 1 If the projection is too large Insert the hex wrench into the hole as illustrated (left) and turn it counterclockwise to reduce the size of the projection. 2 To move the projection to the left Insert the hex wrench into the hole as illustrated (left) and turn it counterclockwise to move the projection to the left. ' 3 To move the projection to the right
18
INSTALLATION
Ez Bracket Adjustment Guide
1. Reset projection
*
Press the
Edge Adj
button on the remote control and select
Reset
.
(Select Settings
→
OPTION
→
Edge Adj
→
Reset to reset the position of the
projection.)
?
OPTION
︿
•
Language
•
Caption
:
Off
•
Pointer
•
Set
ID
:
1
•
PJT
Mode
:
Front
•
Edge
Adj
•
Blank
Image
:
Blue
﹀
2. Adjust the projection to fit within the screen
1
If the projection is too large
Insert the hex wrench into the hole as illustrated (left) and turn it counterclockwise to reduce
the size of the projection.
2
To move the projection to the left
Insert the hex wrench into the hole as illustrated (left) and turn it counterclockwise to move
the projection to the left.
'
3
To move the projection to the right