LG L1404R Owners Manual - Page 16
WP Series
View all LG L1404R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
WP Series How to Install the Unit 1 To prevent vibration and noise, make sure the unit is installed securely and firmly. 2 Install the unit where the sunlight does not shine directly on the unit. Cooled air 30"~60" 3 There should be no obstacles, such as a fence and wall, within 20" from the back of the cabinet because it will prevent heat radiation of the condenser. Restriction of outside air will greatly reduce the cooling efficiency of the air conditioner. Awning Fence Heat radiation About 1/2" Over 20" CAUTION: All side louvers of the cabinet must remain exposed to the outside of the structure. 4 Install the unit a little slanted so the back is slightly lower than the front (about 1/2"). This will force condensed water to flow to the outside. 5 Install the unit with the bottom about 30"~60" above the floor level. Window Requirements NOTICE : All supporting parts should be secured to firm wood, masonry, or metal. • This unit is designed for installation in standard double hung windows with actual opening widths from 29" to 41". • The top and bottom window sash must open sufficiently to allow a clear vertical opening of 18" from the bottom of the upper sash to the window stool. 29" to 41" 18" min. Inner sill Interior wall 29" min. (Without frame curtain) Sash Window Offset Sill Exterior 16